5
•
Make certain that hoses are not pinched, kinked or damaged during installation.
•
Check for leaks after water line is connected.
•
Although the unit has been tested and cleaned at the factory, due to long-term transit and storage, the
first batch of cubes must be discarded.
•
Remove the packing materials and clean the dispenser before using.
•
Turn on the water supply tap before switching on the ice maker. Never turn the water supply tap off
when the dispenser is working.
•
Except to take ice from the unit, keep the door closed in order to reduce ice melting and to promote
proper ice formation.
•
If the dispenser will not be used for a long time, before the next use it must be thoroughly cleaned.
Follow carefully any instructions provided for cleaning or use of sanitizing solution. Do not leave any
solution inside the dispenser after cleaning.
•
Do not touch the condenser fins. They are sharp and can be easily damaged.
•
DO NOT use solvent-based cleaning agents or abrasives on the interior. These cleaners may transmit
taste to the ice cubes, or damage or discolor the interior.
•
The ice machine cleaner contains acids. Do not use or mix with any other solvent-based cleaning
products. Use rubber gloves to protect hands. Carefully read the safety instructions on the container of
the ice machine cleaner.
•
Do not use the apparatus other than for its intended purpose.
•
Do not place heavy objects or containers containing water on the ice maker. The objects or
containers may fall and cause water to leak and the insulation may be weakened, resulting in a fire
due to a short circuit.
•
Do not install the product in a humid place or where there is a risk of water splashing. Insulation may
be weakened, resulting in short circuit, electric shock, or fire.
•
Do not use: If the product malfunctions, such as smoke or burning smell, unplug the power cord to
stop operation. If you continue operating in abnormal conditions, there is a risk of fire or electric
shock.
•
Do not use: Do not use if the outlet is loose or has a problem. There is a risk of fire due to electric
shock or short circuit.
•
Do not modify or repair the product yourself. Ignition or abnormal operation is dangerous and may
cause more trouble.
•
Do not allow electrical cords or plugs to be pinched or twisted. The cord or plug may be peeled and
there is a risk of fire or electric shock. If the cord or plug is peeled or damaged, be sure to ask the
service to replace it.
•
Do not damage the inside of the dispenser with a sharp tool. The ice reservoir may break or become
damaged.
•
When not in use for a long time, remove ice and water (to prevent winter frost), and unplug the power
cord from the outlet.
•
If there is a risk of slippery water or oil on the floor near the ice maker, please wipe it. There is a risk of
injury if you slip on the dispenser or get hands or feet in the bottom of the side.
•
When transferring this dispenser to another person, please hand it along with the instruction manual.
New users need a manual for safe use.
•
Do not put your hands or feet on the bottom of the ice maker. The bottom of the dispenser has iron
plates and various parts which may cause injury.
•
If you unplug the power plug from the wall outlet and plug it back in again, wait at least 5 minutes
before reinserting. If it is plugged in immediately, it may cause a trouble in operation of the freezer and
it may cause malfunction of the ice maker.
•
In areas where there is a lot of lime content in the water, please install a lime removal filter at the
entrance of the product water supply (the product life may be shortened by calcareous).
• Do not let children hang on the product. There is a danger of the
dispenser twitching or falling, resulting in injury. In particular, do not let children hang on the reservoir
not fixed to the product. Never allow children to operate, play with, or crawl inside the dispenser.
Join the conversation about this product
Here you can share what you think about the Accucold AIWD282 Ice Cube Maker. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.