Home > Camping & Outdoor > Tents > Vango Tents > Vango Scimitar 200 Tent

Manual Vango Scimitar 200 Tent

Need a manual for your Vango Scimitar 200 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

TENT PITCHING INSTRUCTIONS – SCIMITAR (EN)

Flysheet First Pitching

1. Assemble poles and lay them parallel on the ground. There should be 1 long, 1 medium and 1 short alloy pole.

2. Open flysheet on ground and position tent in desired direction. Check that internal tension bands are loosened.

3. Locate pole sleeves on the flysheet and insert poles. The poles are colour coded to the pole sleeves.

4. Locate one end of each pole into corresponding eyelets on pole anchor straps

5. From the opposite side, push poles into an arch and locate pole ends into corresponding eyelets on pole anchor straps.

6. Tighten up the tension straps at the base of the two main poles. Tighten up the tension strap at the right hand side of the short porch

pole.

7. Peg out adjustable anchor straps at the rear of the tent using pegs supplied.

8. Pull flysheet forwards, away from pegged points, until tent takes shape. Peg the front anchor strap.

9. Attach flysheet clips to poles

10. Peg down pole anchor straps and remaining flysheet pegging points

11. Peg out ALL guy lines.

Inner Attachment

1. Open out inner tent inside flysheet and position doorway to correspond with the porch entrance of the flysheet.

2. Starting from the rear corners of the tent, attach the elasticated hooks on the groundsheet to corresponding rings on the flysheet

anchor straps. Suspend the inner by attaching the elastic loops of the inner tent with clips on inside of flysheet.

3. Align the porch groundsheet and clip / peg into place.

Tension Band System

1. Insert tension bands through corresponding access points in the inner tent (ceiling and sidewall). Connect the straps into the side-

release buckles.

2. Adjust the tension of the TBS straps until the slack is taken out

3. Tension band pockets are provided for storage when not in use.

………………………………………………………………………………………………………………………………………………………………………………………

AUFBAUANLEITUNG – SCIMITAR (DE)

Mit Außenzeltaufbau zuerst

1. Stecken Sie die Stangen zusammen und legen Sie sie parallel zueinander auf den Boden. Es sollten 1 lange, 1 mittlere und 1 kurze

Metallstange da sein.

2. Breiten Sie das Überdach auf dem Boden aus und positionieren Sie das Zelt in der gewünschten Richtung. Prüfen Sie, dass die inneren

Spannbänder locker sind.

3. Fixieren Sie die Stangenhüllen am Überdach und setzen Sie die Stangen ein. Die Stangen und Stangenhüllen sind farblich

gekennzeichnet.

4. Fixieren Sie ein Ende jeder Stange in den dazu passenden Ösen in den Verankerungsschnüren der Stangen.

5. Drücken Sie die Stangen gewölbeförmig von der entgegengesetzten Seite aus hoch und fixieren Sie die Stangenenden in den dazu

passenden Ösen in den Verankerungsschnüren der Stangen.

6. Spannen Sie die Spannungsbänder am Ende der beiden Hauptstangen. Spannen Sie das Spannungsband an der rechten Seite der

kurzen Stange des Vordachs.

7. Stecken Sie die flexiblen Verankerungsschnüre am hinteren Ende des Zelts aus, indem Sie die mitgelieferten Heringe verwenden.

8. Ziehen Sie das Überdach nach vorne, von den Befestigungspunkten weg, bis das Zelt Form annimmt. Befestigen Sie die vordere

Verankerungsschnur.

9. Befestigen Sie die Clips des Überdachs an den Stangen.

10. Befestigen Sie die Verankerungsschnüre der Stangen und die verbleibenden Befestigungspunkte des Überdachs.

11. Spannen Sie ALLE Spannseile.

Innenbefestigung

1. Breiten Sie das Innenzelt im Inneren des Überdachs aus und positionieren Sie die Türöffnung so, dass sie mit dem Eingang des Vorbaus

am Überdach übereinstimmt.

2. Von den hinteren Ecken des Zeltes ausgehend, befestigen Sie die elastischen Haken an der Bodenplane mit den passenden Ringen an

den Verankerungsschnüren des Überdachs. Hängen Sie das Innenzelt ein, indem Sie die Gummibänder des Innenzelts mit Clips an der

Innenseite des Überdachs befestigen.

3. Richten Sie die Bodenplane des Vorbaus aus und klippen/stecken Sie sie an Ihren Platz.

Spanngurtvorrichtung

1. Ziehen Sie die Spannschnüre durch die zugehörigen Zugangspunkte im Innenzelt (Decke und Seitenwand). Verbinden Sie die Schnüre

mit den seitlichen Freigabespangen.

2. Passen Sie die Spannung der TBS-Schnüre an, bis das Zelt gespannt ist.

3. Taschen für die Spannschnüre werden zum Verstauen der nicht gebrauchten Bänder mitgeliefert.

Rating

Let us know what you think about the Vango Scimitar 200 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Vango Scimitar 200 Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Vango Scimitar 200 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Vango Scimitar 200 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Vango. They might be able to provide an original manual. Are you looking for the manual of your Vango Scimitar 200 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Vango
Model	Scimitar 200
Category	Tents
File type	PDF
File size	0.17 MB

All manuals for Vango Tents
More manuals of Tents

Frequently Asked Questions about Vango Scimitar 200 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more