Home > Camping & Outdoor > Tents > Vango Tents > Vango Nemesis 200 Tent

Manual Vango Nemesis 200 Tent

Need a manual for your Vango Nemesis 200 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

TENT PITCHING INSTRUCTIONS – NEMESIS (UK)

FLYSHEET FIRST PITCHING

 Assemble the four poles and lay them on the ground.

 Open flysheet on ground and position tent in desired direction.

 Insert the two long, straight poles through the pole sleeves running diagonally across the length of flysheet.

 Insert two remaining poles through pole sleeves running across the width of the flysheet.

 Locate the ends of the long, straight poles into the eyelets on one end of flysheet.

 Push these poles from the opposite side, forming an arch and locate the pole ends into corresponding eyelets on pole anchor strap.

 Repeat this process for the two remaining poles.

 Tighten the flysheet by adjusting the tension straps to suit.

 The tent will now be free standing, reposition if required.

 Peg out adjustable anchor straps at one end of the tent.

 Pull the tent forwards and peg the anchor straps on the opposite end.

 Peg through webbing loops located at each pole anchor strap using the pegs.

 Peg out all guy lines.

INNER

 Open out inner tent inside flysheet and position doorway to correspond with the porch entrance of the flysheet.

 Starting from the rear corners of the tent, attach the elasticated hooks on the groundsheet to corresponding rings on the flysheet anchor

straps.

 Suspend the inner by attaching toggles of inner tent through rings on inside of flysheet

………………………………………………………………………………………………………………………………………………………………………………………….....

AUFBAUANLEITUNG – NEMESIS (DE)

MIT AUßENZELTAUFBAU ZUERST

 Stecken Sie die Stangen zusammen und legen Sie sie auf den Boden

 Breiten Sie das Überdach auf dem Boden aus und positionieren Sie das Zelt in der gewünschten Richtung.

 Stecken Sie die beiden längeren Stangen diagonal durch die Gestängekanäle an der Außenseite des Außenzelts ein.

 Führen Sie die verbleibenden Stangen durch die Stangenhüllen, die über die gesamte Breite des Überdachs gehen.

 Fixieren Sie ein Ende jeder Stange in den dazu passenden Ösen in den Verankerungsschnüren der Stangen.

 Drücken Sie die Stangen gewölbeförmig von der entgegengesetzten Seite aus hoch und fixieren Sie die Stangenenden in den dazu

passenden Ösen in den Verankerungsschnüren der Stangen.

 Wiederholen Sie dies mit den übriggebliebenen Stangen

 Spannen Sie das Vordach, indem Sie die Spannschnüre am Ende der Stangen festziehen.

 Das Zelt steht nun im Großen und Ganzen von selbst, positionieren Sie es neu, falls nötig.

 Stecken Sie die flexiblen Verankerungsschnüre am hinteren Ende des Zelts aus, indem Sie die mitgelieferten Heringe verwenden.

 Ziehen Sie das Überdach nach vorne, von den Befestigungspunkten weg, bis das Zelt Form annimmt. Befestigen Sie die vordere

Verankerungsschnur.

 Stecken Sie die Arretierstifte durch die Schlaufenbänder an der Verankerungsschnur jeder Stange.

 Spannen Sie ALLE Spannseile.

INNENBEFESTIGUNG

 Legen Sie die Innenzelte im Außenzelt aus und richten Sie die Eingänge so aus, dass sie in den Wohnbereich führen.

 Befestigen Sie die elastischen Haken an der Bodenplane, wobei von den hinteren Ecken des Zelts zu beginnen ist.

 Die Aufhängung des Innenzelts erfolgt, indem die Knebel des Innenzelts durch die auf der Innenseite des Außenzelts befindlichen Ringe

gesteckt werden.

INSTRUCTIONS DE MONTAGE – NEMESIS (FR)

MONTAGE EN COMMENÇANT PAR LE DOUBLE TOIT

 Rassembler les arceaux et les poser sur le sol

 Ouvrir le double toit sur le sol et positionner la tente dans la direction désirée.

 Faire passer les deux mâts longs diagonalement par les manches à l'extérieur du double toit

 Insérer les arceaux restants dans les fourreaux d'arceau courant sur la largeur du double toit.

 Placer une extrémité de chaque arceau dans les oeillets correspondants, sur les bandes d'ancrage des arceaux.

 Depuis le côté opposé, pousser les arceaux à l'intérieur d'une arche et placer les extrémités des arceaux dans les oeillets correspondants,

sur les bandes d'ancrage des arceaux.

 Répéter cette manœuvre pour les arceaux restants

 Resserrer le double toit en ajustant les sangles de tension à la base des arceaux.

 La tente sera désormais sommairement isolée, la repositionner, si nécessaire

 Tirer le double toit vers l'avant, à l'opposé des points de fixation, jusqu'à ce que la tente prenne sa forme. Attacher la bande d'ancrage à

l'avant.

 Attacher les sangles placées sur chaque bande d'ancrage des arceaux, à l'aide de piquets.

 Attacher TOUTES les cordes de tension.

ATTACHER LA TENTE ANTÉRIEURE

 Déferler la tente intérieure sous le double toit et orienter les portes selon le compartiment

 Commençant par les coins arrière, attacher les crochets élastiques du tapis de sol

 Faire pendre la tente intérieure en attachant les crochets de celle-ci aux anneaux intérieurs du double toit

Rating

Let us know what you think about the Vango Nemesis 200 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Vango Nemesis 200 Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Vango Nemesis 200 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Vango Nemesis 200 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Vango. They might be able to provide an original manual. Are you looking for the manual of your Vango Nemesis 200 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Vango
Model	Nemesis 200
Category	Tents
File type	PDF
File size	0.22 MB

All manuals for Vango Tents
More manuals of Tents

Frequently Asked Questions about Vango Nemesis 200 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more