Home > Camping & Outdoor > Tents > Vango Tents > Vango Galaxy 300 Tent

Manual Vango Galaxy 300 Tent

Need a manual for your Vango Galaxy 300 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

TENT PITCHING INSTRUCTIONS – GALAXY (EN)

Flysheet First Pitching

1. Open the flysheet on the ground and position the tent in desired direction.

2. Insert the three long poles into their sleeves.

3. On one side, locate the end of each pole into the corresponding eyelets on pole anchor straps.

4. On opposite side, push poles into an arch and locate pole ends into the corresponding eyelets on pole anchor straps.

5. Tighten all the tensions straps at the base of the poles.

6. Peg out adjustable anchor straps at the rear of the tent using pegs supplied.

7. Pull flysheet taut, away from the pegging points, until tent takes shape. Loosely peg the two adjustable pegging points at the front of

the tent.

8. Insert the two short poles into their sleeves on the roof. Connect into their eyelets starting at the rear.

9. Pull front of tent forwards until taut and peg corners

10. Peg down pole anchor straps and remaining flysheet pegging points

11. Peg out ALL guy lines.

12. Align the porch groundsheet and clip/peg into place.

Inner Attachment

1. Open out inner and position doorway to correspond with the flysheet door(s).

2. Starting from the rear corners of the tent, attach the elasticated hooks on the groundsheet to corresponding rings on the flysheet

anchor straps. Suspend the inner by attaching elastic loops of inner tent with clips on inside of flysheet.

3. To fit porch groundsheet clip the groundsheet's hook to metal rings at base of flysheet. Secure the toggles through the rings at top of

groundsheet.

Tension Band System

1. Insert tension bands through corresponding access points in the inner tent (ceiling and sidewall). Connect the straps into the side-

release buckles.

2. Adjust the tension of the TBS straps until the slack is taken out

3. Tension band pockets are provided for storage when not in use.

……………………………………………………………………………………………………………………………………………………………………………………………………………

AUFBAUANLEITUNG – GALAXY (DE)

Mit Außenzeltaufbau zuerst

1. Öffnen Sie das Überdach auf dem Boden und positionieren Sie das Zelt in der gewünschten Richtung.

2. Führen Sie die drei langen Gestänge in die vorgesehenen Gestänge-Kanäle.

3. Fixieren Sie das Ende jeder Stange an einer Seite in den dazu passenden Ösen in den Verankerungsschnüren der Stangen.

4. Drücken Sie die Stangen gewölbeförmig an der gegenüberliegenden Seite hoch und fixieren Sie die Stangenenden in den dazu

passenden Ösen in den Verankerungsschnüren der Stangen.

5. Alle Spanngurte unten an den Stangen fest anziehen.

6. Stecken Sie die flexiblen Verankerungsschnüre am hinteren Ende des Zelts aus, indem Sie die mitgelieferten Heringe verwenden.

7. Ziehen Sie das Zelt nach vorne, von den Befestigungspunkten weg, bis das Zelt Form annimmt. 1. Befestigen Sie die beiden vorderen

Heringe provisorisch. (Diese müssen später nachjustiert werden.)

8. Führen Sie die Gestänge in die farblich markierten Gestänge-Kanäle im Dach. Stecken Sie die Endstücke der Gestänge in die

vorgesehenen Ösen, die hinteren Ösen zuerst.

9. Ziehen Sie das Zelt so weit nach vorne bis es straff steht und fixieren die Eckpunkte.

10. Befestigen Sie die Verankerungsschnüre der Stangen und die verbleibenden Befestigungspunkte des Überdachs.

11. Spannen Sie ALLE Spannseile.

12. Richten Sie die Bodenplane des Vorbaus aus und klippen/stecken Sie sie an Ihren Platz.

Innenbefestigung

1. Breiten Sie das Innenzelt aus und positionieren Sie die Türöffnung so, dass sie mit der/den Tür(en) des Überdachs übereinstimmt.

2. Von den hinteren Ecken des Zeltes ausgehend, befestigen Sie die elastischen Haken an der Bodenplane mit den passenden Ringen an

den Verankerungsschnüren des Überdachs. Hängen Sie das Innenzelt ein, indem Sie die Gummibänder des Innenzelts mit Clips an der

Innenseite des Überdachs befestigen.

3. Um die Bodenplane des Vorbaus einzupassen, klippen Sie den Haken der Bodenplane an die Metallringe an der Unterseite des

Überdachs. Führen Sie die Schnüre durch die Ringe oben an der Bodenplane.

Spanngurtvorrichtung

1. Ziehen Sie die Spannschnüre durch die zugehörigen Zugangspunkte im Innenzelt (Decke und Seitenwand). Verbinden Sie die Schnüre

mit den seitlichen Freigabespangen.

2. Passen Sie die Spannung der TBS-Schnüre an, bis das Zelt gespannt ist.

3. Taschen für die Spannschnüre werden zum Verstauen der nicht gebrauchten Bänder mitgeliefert.

Rating

Let us know what you think about the Vango Galaxy 300 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Vango Galaxy 300 Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Vango Galaxy 300 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Vango Galaxy 300 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Vango. They might be able to provide an original manual. Are you looking for the manual of your Vango Galaxy 300 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Vango
Model	Galaxy 300
Category	Tents
File type	PDF
File size	0.27 MB

All manuals for Vango Tents
More manuals of Tents

Frequently Asked Questions about Vango Galaxy 300 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more