Home > Audio, TV & Photo > CD Players > Tascam CD Players > Tascam CD-6010 CD Player

Manual Tascam CD-6010 CD Player

Need a manual for your Tascam CD-6010 CD Player? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

2 TASCAM CD-6010

IMPORTANT SAFETY INSTRUCTIONSv

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol,

within equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

8 Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

9 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

12 Use only with the cart, stand, tripod, bracket, or

table specied by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Do not expose this apparatus to drips or splashes.

•

Do not place any objects filled with liquids, such as

•

vases, on the apparatus.

Do not install this apparatus in a confined space such

•

as a book case or similar unit.

The apparatus draws nominal non-operating power

•

from the AC outlet with its POWER or STANDBY/ON

switch not in the ON position.

The apparatus should be located close enough to the

•

AC outlet so that you can easily grasp the power cord

plug at any time.

The mains plug is used as the disconnect device, the

•

disconnect device shall remain readily operable.

Products with Class I construction are equipped with a

•

power supply cord that has a grounding plug. The cord

of such a product must be plugged into an AC outlet

that has a protective grounding connection.

If the product uses batteries (including a battery pack

•

or installed batteries), they should not be exposed to

sunshine, fire or excessive heat.

CAUTION for products that use replaceable lithium

•

batteries: there is danger of explosion if a battery is

replaced with an incorrect type of battery. Replace only

with the same or equivalent type.

Caution should be taken when using earphones or

•

headphones with the product because excessive

sound pressure (volume) from earphones or head-

phones can cause hearing loss.

In North America use only on 120V supply.

Rating

Let us know what you think about the Tascam CD-6010 CD Player by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Tascam CD-6010 CD Player?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Tascam CD-6010 CD Player. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Tascam CD-6010 CD Player. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Tascam. They might be able to provide an original manual. Are you looking for the manual of your Tascam CD-6010 CD Player in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Tascam
Model	CD-6010
Category	CD Players
File type	PDF
File size	4.72 MB

All manuals for Tascam CD Players
More manuals of CD Players

Frequently Asked Questions about Tascam CD-6010 CD Player

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I repair scratches on a CD myself? Verified

Scratches prevent de laser from reading the disc correctly. When the scratches are only superficial it is possible to repair them yourself by polishing the disc with a slightly abrasive compound. Ideally you use a professional abrasive compound but it’s also possible to use regular toothpaste. After polishing the disc it needs to be washed and let to dry. There are specialised businesses that can do this.

This was helpful (27) Read more