Home > Camping & Outdoor > Air Beds > Robens Air Beds > Robens Vapour 60 Air Bed

Manual Robens Vapour 60 Air Bed

Need a manual for your Robens Vapour 60 Air Bed? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

ROBENS AIRBED

UK · Inflate a Robens airbed with Peak valve

The airbed can be inated by mouth by breathing air into the valve – but we recommend the use of a Robens Pump Sack

for easy and quick ination of the airbed. By using the Pump Sack the airbed is inated without introducing humidity.

1. Open the valve on the airbed and attach the nozzle of the Pump Sack to the valve.

2. Open the Pump Sack to ll it with air. Close the opening of the Pump Sack and roll/press down on the Pump Sack to pump air

into the airbed. Repeat this until the airbed is inated. Remove the Pump Sack nozzle from the valve and close the valve.

3. Deate the airbed. Open the valve and use a nger to push down the peak valve to release the air from the airbed.

Roll up the airbed and pack it in the carrybag.

Instructions for mat repair

1. To locate a small puncture, inate the mattress and blow some air by mouth

into the mattress, then close the valve (rst push in the valve and then lock it).

2. Apply any liquid soap to wet the surface of the mattress.

Small escaping bubbles will indicate the puncture.

3. Mark the puncture.

4. Clean and dry the surface around the puncture.

5. Open the valve and release the air. Remove the cover from the patch.

Press the patch so it covers the cut or tear.

6. Two hours later, inate the mattress and examine the repair.

DE · Aufblasen eines Luftbetts mit Peak-Rückschlagventil von Robens

Sie können das Luftbett über das Flachventil selbst mit dem Mund aufblasen.

Um das Luftbett schnell und einfach aufzublasen, empfehlen wir allerdings, den Robens Pump Sack zu verwenden.

Wenn Sie das Luftbett mit dem Pump Sack aufblasen, wird keine Feuchtigkeit in das Innere des Luftbetts eingebracht.

1 Önen Sie das Ventil am Luftbett und befestigen Sie die Düse des Pump Sack daran.

2 Önen Sie den Pump Sack, um ihn mit Luft zu füllen. Schließen Sie die Önung des Pump Sack und rollen/drück en Sie den Pump Sack

nach unten, um die Luft in das Luftbett zu pumpen. Wiederholen Sie diesen Vorgang, bis das Luftbett vollständig aufgepumpt ist. Entfe rnen

Sie die Düse des Pump Sack vom Ventil und verschließen Sie es.

3 Entleeren des Luftbetts. Önen Sie das Ventil und drücken Sie die Silikonlasche mit einem Finger herunter, um die Luft aus dem

Luftbett abzulassen. Rollen Sie das Luftbett zusammen und verstauen Sie es in der Tragetasche.

Anleitung zur Reparatur von Matten

1. Um das Loch zu lokalisieren, blasen Sie mit dem Mund Luft in die Matte und

schließen Sie das Ventil (Drucken Sie erst das Ventil ein und schließen

Sie dann das Ventil).

2. Befeuchten Sie nun die Matte mit Seifenlauge.

An dem Loch werden sich nun kleine Luftblasen bilden.

3. Markieren Sie die schadhafte Stelle.

4. Reinigen und trocknen Sie die Oberäche an der schadhaften Stelle.

5. Önen Sie das Ventil und lassen Sie die Luft entweichen.

Kleben Sie den Reparaturicken auf den Riss oder Schnitt.

6. Blasen Sie nach zwei Stunden die Matratze wieder auf und prüfen Sie die Reparatur.

WARNING:

This mat is not for use in water. It is not a life saving device or

water toy.

Do not expose to the sun or heat sources.

Do not let the product come in contact with sharp, pointed objects.

ACHTUNG:

Vermeiden Sie den Kontakt von aufblasbaren Produkten mit scharfen,

spitzen Gegenständen. Diese Matte ist nicht für den Gebrauch im

Wasser geeignet. Sie

kann nicht als Rettungsgegenstand oder als Wasserspielzeug

verwendet werden. Nie in die Sonne legen oder anderen Wärmequellen

aussetzen! Vermeiden Sie den Kontakt von aufblasbaren Produkten mit

scharfen, spitzen Gegenständen.

Rating

Let us know what you think about the Robens Vapour 60 Air Bed by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Robens Vapour 60 Air Bed?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Robens Vapour 60 Air Bed. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Robens Vapour 60 Air Bed. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Robens. They might be able to provide an original manual. Are you looking for the manual of your Robens Vapour 60 Air Bed in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Robens
Model	Vapour 60
Category	Air Beds
File type	PDF
File size	0.83 MB

All manuals for Robens Air Beds
More manuals of Air Beds

Frequently Asked Questions about Robens Vapour 60 Air Bed

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

My air bed deflates slowly over time, but does not appear to leak. Why is that? Verified

Differences in temperature are a common cause for an air bed to fel softer. Hot air expands and old air contracts. When an air bed is is filled with warm air in the day and it cools down in the night, the air bed will feel softer. Other causes are a defective valve or old material that has become porous. In the latter case the air bed needs replacing. Contact the manufacturer in the case of a defective valve.

This was helpful (151) Read more

Can I repair a leak in my air bed with a bicycle tire repair kit? Verified

It is possible to repair a leak in an air bed with a bicycle tire repair kit. However, the PVC used in air beds can be different from that in bicycle tires, making it possible that the glue will not adhere to the air bed well. For a long lasting repair it is best to get a repair kit especially made for air beds.

This was helpful (45) Read more

Can I inflate an air bed with my mouth? Verified

Inflating an air bed with your mouth is not advisable. Apart from it taking a long time and making the person doing it dizzy, a large disadvantage of inflating an air bed with your mouth is that next to air, saliva will be blown into the air bed. This may affect the air bed over time.

This was helpful (29) Read more

The indents in the shape of the air bed feel uncomfortable while sleeping, what can I do about this? Verified

These indents in the shape of the air bed are needed to prevent it from bulging when being inflated. If these feel too sturdy the air bed has been inflated too much. Let out some air to make it softer.

This was helpful (27) Read more

The air bed feels cold, what can I do? Verified

An air bed does not isolate well because it is filled with air. The cold from the floor will go into the air of the air bed, making it feel cold. To prevent this you can use an insulated mat under the air bed or an insulated cover sheet on top of the air bed.

This was helpful (22) Read more