Home > Business equipment > Safes > Phoenix Safes > Phoenix SS1171K Safe

Manual Phoenix SS1171K Safe

Need a manual for your Phoenix SS1171K Safe? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

SS1170K/SS1180K INTRUCTIONS

& GUARANTEE REGISTRATION

SS1170K/SS1180K ISTRUZIONI & REGISTRAZIONE

GARANZIA

SS1170K/SS1180K BEDIENUNGSANLEITUNG UND

GARANTIEREGISTRIERUNG

1. An electric drill

2. 1 masonry drill bit -10mm

3. Adhesive tape

4. A pencil

5. A ruler

6. A 12mm socket

HOW TO BOLT YOUR SAFE DOWN

YOU WILL REQUIRE

CHOOSING A PLACE TO INSTALL YOUR SAFE

1. Look for a place that does not restrict access and the swing of the door.

2. Ensure that the floor is level.

3. For best results a concrete floor is preferable.

DRILLING & BOLTING

1. Manoeuvre the safe into the required position. Now with the pencil mark the floor around the safe

(If the safe is against a wall then just the front and sides needs to be marked）

2. Open the safe door.

3. Using the pencil, mark the positions on the floor for drilling through the base fixing holes in the base

of the safe.

4. Now move the safe to one side, giving you access to the markings on the floor.

5. Before using the drill bit. With the ruler measure 60mm from the tip of the bit and put a piece of

adhesive tape around the bit to ensure you do not drill too deep.

6. Drill the 12mm holes in the floor until you reach your 60mm marker.

7. Clean the floor around the holes.

8. There are three parts to your bolts

a. A coach screw

b. A plastic expanding sleeve

c. A steel washer

9. Insert the plastic expanding sleeves into the drilled holes.

10. Place the safe back into position, insert the coach screws, including the washers, through the base

of the safe, into the floor and tighten until you can not tighten them any further.

YOUR SAFE IS NOW BASE FIXED.

Thank you for purchasing a Phoenix Safe.

OPENING SAFE

Please insert one of the two keys supplied into the key hole and turn clockwise.

Then pull the door to open.

Your safe is ready prepared for base fixing. To base fix your safe, follow the instructions below.

Version 1/PB/JAN 16

1. 1 trapano elettrico

2. 1 punta da trapano per edilizia -10mm

3. Nastro adesivo

4. Una matita

5. Un righello

6. Una chiave da 12mm

COME ANCORARE LA CASSAFORTE

MATERIALE NECESSARIO

SCELTA DEL LUOGO PER INSTALLARE LA CASSAFORTE

1. Scegliere un luogo che non causi restrizioni di accesso e permetta l’apertura dello sportello.

2. Assicurarsi che il pavimento sia piano.

3. Un pavimento in cemento è ottimale.

FORARE & ANCORARE

1. Collocare la cassaforte nella posizione desiderata. Con la matita tratteggiarne la sagoma sul

pavimento. (Se la cassaforte è appoggiata ad una parete basterà tracciare la parte laterale e

frontale).

2. Aprire lo sportello della cassaforte.

3. Con la matita contrassegnare sul pavimento la posizione dei fori da praticare attraverso la base di

della cassaforte.

4. Spostare la cassaforte in modo da avere accesso ai contrassegni sul pavimento.

5. Prima di usare la punta da trapano: con il righello misurare 60mm dall’apice della punta ed

applicare un pezzo di nastro adesivo attorno alla punta in modo da non praticare fori troppo

profondi.

6. Praticare fori da 12mm nel pavimento fino a raggiungere i 60mm indicati.

7. Pulire il pavimento intorno ai fori.

8. I bulloni sono composti da tre parti

a. Una vite

b. Un tassello in plastica ad espansione

c. Una rondella in acciaio

9. Inserire i tasselli in plastica nei fori praticati.

10. Riposizionare la cassaforte, inserire le viti, comprese le rondelle, attraverso i fori nella base della

cassaforte, nel pavimento e stringere saldamente.

LA CASSAFORTE E’ ORA ANCORATA AL PAVIMENTO.

Grazie per aver acquistato una Cassaforte Phoenix.

APRIRE LA CASSAFORTE

Inserire nella serratura una delle due chiavi in dotazione e girare in senso orario.

Quindi tirare lo sportello per aprire.

La cassaforte è pronta per essere fissata alla base. Per fissare la cassaforte alla base seguire le istruzioni

sotto indicate.

1. 1 Bohrmaschine

2. 1 x 12mm Bohrer

3. Klebeband

4. 1 Bleistift

5. 1 Lineal

6. 1 x 13mm Schraubenschlüssel

-BODENVERANKERUNG DES TRESORS-

SIE BENÖTIGEN:

DIE AUSWAHL DES STANDORTES FÜR IHREN TRESOR

1. Suchen Sie sich einen Platz aus, an dem das Öffnen der Tresortür durch nichts beeinträchtigt wird

(Türradius).

2. Vergewissern Sie sich, dass der Boden gerade / eben ist.

3. Am besten ist ein Betonboden.

BOHREN & BEFESTIGEN

1. Stellen Sie den Tresor auf die gewünschte Position. Nun markieren Sie mit einem Bleistift die

äußeren Abmessungen des Tresors auf dem Boden (wenn der Tresor an der Wand steht, markieren

Sie bitte nur die Front und die beiden Seiten)

2. Öffnen Sie die Tresortür.

3. Markieren Sie die Bohrlöcher auf dem Fußboden. Benutzen Sie hierfür den Bleistift.

4. Entfernen Sie nun den Tresor, sodass die Markierungen auf dem Fußboden zu sehen sind.

5. Bevor Sie den 12mm Bohrer benutzen, messen Sie mit einem Lineal 60mm von der Bohrerspitze ab

und markieren Sie diese Stelle mit Klebeband, um sicher zu stellen, dass Sie nicht zu tief bohren.

6. Bohren Sie die 12mm Löcher in den Fußboden und achten Sie darauf, dass Sie nicht tiefer als 46mm

bohren.

7. Entfernen Sie jetzt die Bohrspäne und reinigen Sie den Fußboden

8. Ein Befestigungsset besteht aus 3 Teilen:

a. einer Sechskantsteckschraube

b. einer Unterlegscheibe

c. einem Plastikdübel

9. Stecken Sie die Dübel in die Bohrlöcher

10. Positionieren Sie den Tresor erneut, setzen Sie die Unterlegscheibe auf die Schrauben, stecken Sie

die Schrauben vom Tresorinneren durch die Bohrungen in die Dübel und ziehen diese dann mit dem

Schraubenschlüssel fest.

IHR TRESOR IST NUN IM BODEN VERANKERT.

Vielen Dank, dass Sie sich für einen Tresor aus dem Hause Phoenix entschieden haben.

ÖFFNEN DES SAFES

Einen der beiden mitgelieferten Schlüssel in das Schlüsselloch stecken und im Uhrzeigersinn drehen.

Dann am Türgriff ziehen um den Tresor zu öffnen.

Ihr Tresor ist bereits für die Bodenmontage vorbereitet. Bitte folgen Sie den unten stehenden

Anleitungen.

REGISTRAZIONE DELLA GARANZIA

Per una maggiore sicurezza vi raccomandiamo di inoltrare la vostra

registrazione della garanzia visitando il nostro sito web: www.phoenixsafe.com

e cliccando su registrazione della garanzia.

VIA MONTE ROSA 28, 20049, CONCOREZZO, MILAN, ITALY | 39 039 5965844

GUARANTEE REGISTRATION

Please submit your guarantee registration by visiting our website

www.phoenixsafe.com and clicking on guarantee registration.

For further assistance or information please contact us on 0151 944 6444.

APEX HOUSE, 1 ORRELL MOUNT, LIVERPOOL, L20 6NS,

UNITED KINGDOM | +44 (0)151 944 6444

GARANTIEKARTE

Aus Sicherheitsgründen empfehlen wir Ihnen, Ihre Garantiekarte online auf

unserer Website www.phoenixsafe.com per Mausklick auf der Schaltfläche

„Garantieanmeldung“ auszufüllen.

DEUTSCHLAND GMBH, BAHNSTR. 23, D-42327 WUPPERTAL

0049-202-69519-0

Rating

Let us know what you think about the Phoenix SS1171K Safe by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Phoenix SS1171K Safe?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Phoenix SS1171K Safe. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Phoenix SS1171K Safe. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Phoenix. They might be able to provide an original manual. Are you looking for the manual of your Phoenix SS1171K Safe in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Phoenix
Model	SS1171K
Category	Safes
File type	PDF
File size	0.31 MB

All manuals for Phoenix Safes
More manuals of Safes

Frequently Asked Questions about Phoenix SS1171K Safe

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

The lock on my electronic safe won't open, but I am sure the code I enter is correct. What can I do? Verified

This can happen when the batteru voltage is too low. This can be caused by cheap or nearly empty batteries. Replace the batteries and try again. If this does not solve the problem you should contact the manufacturer.

This was helpful (1314) Read more

I lost the combination of my safe, what can I do? Verified

In the case of a safe with an electronic lock, there is often an included emergency key with which the safe can still be opened. If no emergency key or other solution is available, there are specialized companies that can help. However, in the case of a small safe, the cost of a specialist may be higher than that of a new safe. In that case, the last option is to break open the safe.

This was helpful (612) Read more

When is it a good idea to secure my safe? Verified

In general it's a good idea to secure safes of 1000 kilogram or less. This prevents a thief to steal the entire safe. It's also possible that an insurance company demands a safe to be secured. Always have your safe secured by a specialist.

This was helpful (179) Read more