Home > Business equipment > Safes > Phoenix Safes > Phoenix DS2504E Safe

Manual Phoenix DS2504E Safe

Need a manual for your Phoenix DS2504E Safe? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Ph Sf Cpny r eac n s gurte

Thank you for purchasing a Phoenix Safe.

OPENING SAFE

Please insert one of the two keys supplied into the key hole and turn

clockwise. Push handle down then pull the door to open.

Your safe is ready prepared for base xing. To base x your safe, follow

the instructions below.

DS2500 BASE FIXING INSTRUCTIONS

MODEL A B C D

DS2501 123 143 149 131

DS2502 123 143 149 131

DS2503 180 180 220 180

CHOOSING A PLACE TO INSTALL YOUR SAFE

1. Look for a place that does not restrict access and the swing of the

door.

2. Ensure that the oor is level.

3. For best results a concrete oor is preferable.

DRILLING & BOLTING

1. Manoeuvre the safe into the required position. Now with the pencil

mark the oor around the safe.

2. Open the safe door.

3. Using the pencil, mark the positions on the oor for drilling through

holes in the base of the safe.

4. Now move the safe to one side, giving you access to the markings on

the oor.

5. Before using the drill bit. With the ruler measure 60mm from the tip of

the bit and put a piece of adhesive tape around the bit to ensure you

do not drill too deep.

6. Drill the 12mm holes in the oor until you reach your 60mm marker.

7. Clean the oor around the holes.

8. There are three parts to your bolts:

a. A coach screw

b. A plastic expanding sleeve

c. A steel washer

9. Insert the plastic expanding sleeves into the drilled holes.

10. Place the safe back into position, insert the coach screws, including

the washers, through the base of the safe, into the oor and tighten

until you can not tighten them any further.

YOUR SAFE IS NOW BASE FIXED.

SECURING THE DATABOX INTO THE SAFE

Using the 2 adhesive strips provided, attach these to the back of the

Databox. Position the box into the bottom of the safe, a󰀩xing it to the back

wall.

Nous vous remercions pour l’achat d’un co󰀨re Phoenix Safe.

OUVERTURE DU COFFRE

Veuillez insérer l’une des deux clefs fournies dans la serrure puis tourner

la dans le sens horaire.

Veuillez pousser la poignée vers le bas ensuite, tirez la porte pour l’ouvrir.

Votre co󰀨re est prêt pour être xé au sol, pour cela veuillez suivre les

instructions ci-dessous.

MODE D’EMPLOI DE FIXATION AU SOL DS2500

MODEL A B C D

DS2501 123 143 149 131

DS2502 123 143 149 131

DS2503 180 180 220 180

CHOISIR UN ENDROIT POUR INSTALLER VOTRE

COFFRE-FORT

1. Cherchez un endroit qui ne limite pas l’accès et l’ouverture de la porte.

2. Assurez-vous que le sol soit de niveau.

3. Pour de meilleurs résultats, un sol en béton est préférable.

PERÇAGE & BOULAGE

1. Manœuvrez le co󰀨re-fort dans la position requise. Maintenant, avec le

crayon marquez le sol autour du co󰀨re-fort

2. Ouvrez la porte du co󰀨re.

3. À l’aide du crayon, marquez les positions sur le sol pour percer au

travers des trous de la base du co󰀨re-fort.

4. Déplacez le co󰀨re-fort d’un côté, vous donnant accès aux marques

sur le sol.

5. Avant d’utiliser le mèche. Avec la règle mesurez 60mm de la pointe de

la mèche et mettre un morceau de ruban adhésif autour du bout pour

vous assurer de ne pas percer trop profondément.

6. Percez les trous de 12 mm dans le sol jusqu’à ce que vous atteigniez

votre marqueur de 60 mm.

7. Nettoyez le sol autour des trous.

8. Vos boulons sont en 3 parties . Une vis . Un manchon d’expansion en

plastique. Une rondelle en acier .

9. Insérez les manchons d’expansion en plastique dans les trous percés.

10. Remettre le co󰀨re-fort en place, insérez les vis , y compris les ron-

delles, à travers la base du co󰀨re-fort, dans le sol et serrez jusqu’à ce

que vous ne puissiez plus les serrer.

VOTRE COFFRE-FORT EST MAINTENANT FIXE AU SOL.

SÉCURISER LA BOITE POUR DONNEES DANS LE

COFFRE

En utilisant les 2 bandes adhésives fournies, xez-les à l’arrière de la

Databox. Placez la boîte dans le fond du co󰀨re-fort, en l’apposant sur le

mur arrière.

V1 MAY 2018

FRENCH

DS2500K INSTRUCTIONS &

GUARANTEE REGISTRATION

Rating

Let us know what you think about the Phoenix DS2504E Safe by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Phoenix DS2504E Safe?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Phoenix DS2504E Safe. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Phoenix DS2504E Safe. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Phoenix. They might be able to provide an original manual. Are you looking for the manual of your Phoenix DS2504E Safe in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Phoenix
Model	DS2504E
Category	Safes
File type	PDF
File size	0.24 MB

All manuals for Phoenix Safes
More manuals of Safes

Frequently Asked Questions about Phoenix DS2504E Safe

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

The lock on my electronic safe won't open, but I am sure the code I enter is correct. What can I do? Verified

This can happen when the batteru voltage is too low. This can be caused by cheap or nearly empty batteries. Replace the batteries and try again. If this does not solve the problem you should contact the manufacturer.

This was helpful (1310) Read more

I lost the combination of my safe, what can I do? Verified

In the case of a safe with an electronic lock, there is often an included emergency key with which the safe can still be opened. If no emergency key or other solution is available, there are specialized companies that can help. However, in the case of a small safe, the cost of a specialist may be higher than that of a new safe. In that case, the last option is to break open the safe.

This was helpful (610) Read more

When is it a good idea to secure my safe? Verified

In general it's a good idea to secure safes of 1000 kilogram or less. This prevents a thief to steal the entire safe. It's also possible that an insurance company demands a safe to be secured. Always have your safe secured by a specialist.

This was helpful (178) Read more