Home > Business equipment > Paper Shredders > PC Line Paper Shredders > PC Line DX-10 Paper Shredder

Manual PC Line DX-10 Paper Shredder

Need a manual for your PC Line DX-10 Paper Shredder? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

PAPER SHREDDER

INSTRUCTION MANUAL

IMPORTANT SAFETY NOTES

INSTALLATION:

- Place the waste bin upright on a stable, level surface.

- Place the shredder mechanism onto the waste bin.

- Make sure the slide switch (fig.1) is in position "ON/AUTO" and then plug

the machine into the mains supply.

- The socket-outlet shall be installed near the equipment and shall be

easily accessible.

The mains connection at the machine must be freely

accessible!

APPLICATION:

The document shredder

The unit should only be fed with paper! Shredding other types of

materials can cause injuries (e.g. by splinters of hard materials) or

may damage the shredder (e.g. destruction of the cutting system).

is a machine for the destruction of common written

material.

FEEDING THE PAPER:

- Move the slide switch (fig.1) to position "ON/AUTO".

- Feed paper through the inlet guide to the cutting system.

Machine switches automatically to forward and draws

paper in the machine. It switches off automatically after shredding.

PAPER JAM: If too much paper is fed to the shredder the cutting system will jam.

Proceed as follows:

- Move the slide switch (fig.1) to position "REV"

- Cutting system runs in reverse and frees excess paper.

- Carefully remove the paper to clear the opening.

- Move the slide switch to "FWD" to clear any paper left in the cutting system.

MOTOR PROTECTION:

The motor will shut down automatically, should it become overloaded. Unplug the

machine and allow the motor to cool down to room temperature before resuming

operation.

CHECKLIST IN CASE OF MALFUNCTION:

If the device does not function, check the following:

- Is the plug connected to the mains?

- Is there a paper jam? ---Follow the instructions under "PAPER JAM".

- Has the motor been overloaded? ---Wait until the motor has cooled, and then restart.

- Is the waste bin full?---switch off and then empty the waste bin.

If none of the above applies, contact your dealer.

MALFUNCTION / MAINTENANCE

TECHNICAL DATA

Cutting width: 7 mm (strips cut)

Cutting capacity: 5 sheets of 80g/m A4 paper

Supply voltage: 230~240V~50Hz

Rated current: 0.8A

Maximum continuous operation: 2 min

Never feed the shredder with a quantity of paper exceeding the

maximum indicated under "TECHNICAL DATA". Should the machine

be overfed, follow the instructions under "PAPER JAM".

OPERATION

Fig. 1

Fig. 2

Model: DX - 10

The machine cannot be operated by more than one person at

any given time! The machine was designed for safe operation

by "one person only".

During the shredding process no other work may be performed

on the machine (for example cleaning, etc).

Keep children away from the machine. This machine's design

and safety concept are based on adult dimensions to ensure

that it can be operated safely by adults only.

Repairs must be executed by a qualified service personnel.

Keep all loose articles of clothing, ties,

jewelry, long hair or other loose objects

away from opening. Injury may result!

Never insert fingers into opening. Serious injury may result!

In case of danger unplug the machine.

Always unplug the machine from the mains power supply

before opening the machine.

INITIATION

This symbol on the product or in the instructions means

that your electrical and electronic equipment should be

disposed at the end of life separately from your household

waste. There are separate collection systems for recycling

in the EU. For more information,please contact the local

authority or your retailer where you purchased the product.

ON/AUTO

REV

FW D

EXPLANATION OF THE CONTROLS

1= Slide switch (fig.1) (ON/AUTO/FWD/REV)

"ON/ " ---machine is ready for operation.

AUTO

"FWD" ---cutting blades are running forward.

"REV" ---cutting blades are reversing.

2= Sensor (forward run) (fig.2)

The shredding operation is started as soon as

a sheet of paper passes through the feed slot.

Rating

Let us know what you think about the PC Line DX-10 Paper Shredder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the PC Line DX-10 Paper Shredder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the PC Line DX-10 Paper Shredder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your PC Line DX-10 Paper Shredder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact PC Line. They might be able to provide an original manual. Are you looking for the manual of your PC Line DX-10 Paper Shredder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	PC Line
Model	DX-10
Category	Paper Shredders
File type	PDF
File size	0.14 MB

All manuals for PC Line Paper Shredders
More manuals of Paper Shredders

Frequently Asked Questions about PC Line DX-10 Paper Shredder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Why does my paper shredder stop after a certain period? Verified

Paper shredders need to cool down after a while, to prevent overheating. The time that the device can work before needing to cool varies between different brands and models.

This was helpful (804) Read more

How often should I oil my paper shredder? Verified

With occasional use, oiling the paper shredder once every two months is sufficient. With (very) regular use you might notice that the machine has difficulty with shredding or that paper gets stuck easily. These are signs that the machine should be oiled.

This was helpful (429) Read more