Home > Bicycles & Mopeds > Bicycle Lights > NiteRider Bicycle Lights > NiteRider MiNewt Mini 350 USB Plus Bicycle Light

Manual NiteRider MiNewt Mini 350 USB Plus Bicycle Light

Need a manual for your NiteRider MiNewt Mini 350 USB Plus Bicycle Light? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Operation

1. Connect the headlamp cord (or extension cable) to the Power Module.

2. Press and release the headlamp power button to turn the light on. Cycle through the three brightness

levels by pressing and releasing the power button.

3. To access the daylight visible flash mode, press and hold the power button for greater than 3

seconds.

4. To turn the light off from either normal or flash mode, press and hold the power button for greater than

1 and less than 3 seconds.

Mounting the Power Module

1. Thread the velcro strap through the slots on the top of the Power Module.

2. Attach the concave surface of the Power Module to a safe, convenient location

on the handlebars, stem or frame, placing the velcro strap over the mating surface.

Attaching Helmet Mount to Helmet

1. Unclamp the straps on each side of the helmet mount and pull them free.

2. Position the mounting plate as close to the centerline of the helmet as possible, orienting the

snap to the rear.

3. Feed each strap into and out of two helmet vents, circling each strap back to the upper edge of the

corresponding clamp.

4. Fasten the straps by inserting them into the clamps.

Mounting Headlamp to Helmet Mount

1. Remove helmet mount body from the base. (Fig A)

2. Slip the O-ring mounting strap into the slot of the helmet mount body with the pull tab pointing

forward. (Fig B)

3. Place the O-ring mounting strap into the front slot of the handlebar mount. (Fig C)

4. Twist the handlebar mount back into its original position. Tighten the handlebar mount screw.

5. Stretch O-ring and pull up, around back of helmet mount body and loop it over and into the back

slot on the head mounting assembly. (Fig D)

6. Snap helmet mount body into helmet mount base. (Fig E) Position light where needed.

Battery Charging and Care

The smart charging circuitry is housed in the Power Module and will recharge a fully discharged

battery in 4½ hours or less. Charging time using USB power may vary depending on computer.

1. Plug the AC Adapter into the Power Module and then into the wall socket.

2. Unplug the AC Adapter from the Power Module and wall socket, grasping the connectors rather

than the cables.

3. Leaving the Power Module and AC Adapter or USB Cable connected indefinitely will not harm the

battery.

Run Time

The MiNewt Mini 350 - USB™ will run up to:

Run time is an approximation and will vary

NiteRider Technical Lighting Systems

8295 Aero Place, Suite 200

San Diego, CA 92123 USA

800.466.8366

www.niterider.com

Light Level

High

Med

Low

Time*

2:00

4:00

6:00

Lumens

350

200

125

Rating

Let us know what you think about the NiteRider MiNewt Mini 350 USB Plus Bicycle Light by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the NiteRider MiNewt Mini 350 USB Plus Bicycle Light?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the NiteRider MiNewt Mini 350 USB Plus Bicycle Light. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your NiteRider MiNewt Mini 350 USB Plus Bicycle Light. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact NiteRider. They might be able to provide an original manual. Are you looking for the manual of your NiteRider MiNewt Mini 350 USB Plus Bicycle Light in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.