Manual NiteRider MiNewt 350 Cordless Bicycle Light
Need a manual for your NiteRider MiNewt 350 Cordless Bicycle Light? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.
Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.
Manual
Loading…
SUPPORT
If you experience difculties during product installation or
operation, NiteRider provides free telephone support on weekdays
from 8:00 AM to 4:30 PM (Pacic Time) at 800.466.8366, ext 4.
You may also e-mail us at support@niterider.com.
WARRANTY
NiteRider stands behind its products with the following MiNewt
Cordless warranties:
•Lifetime warranty on all mechanical components
•2 years on electrical components
•180 days on rechargeable batteries
To obtain warranty service, it is preferable to have your
original sales receipt. Contact the NiteRider customer
service department at 800.466.8366, ext 4 to obtain a Return
Merchandise Authorization (RMA) number. The RMA number
must be prominently displayed on the outside of your package.
The product must be properly packaged to prevent damage
in transit. For complete warranty information, please visit our
website at www.niterider.com.
The MiNewt.350 Cordless will run up to:
The MiNewt.600 Cordless will run up to:
RUN TIMES
Light Level
High
Med
Low
Walk
High
Med
Low
Walk
Time*
1:30
3:00
4:30
30:00
1:30
3:00
4:30
30:00
Lumens
350
225
150
30
600
400
275
40
*Run times are aproximations and will vary.
NiteRider Technical Lighting Systems, Inc.
8295 Aero Place, Suite 200
San Diego, CA 92123
www.niterider.com
OPERATION
1. The MiNewt Cordless headlamp is shipped in lock mode. In order to
use the headlamp it must be unlocked. To unlock the headlamp,
press and hold the power button for several seconds until the power
button turns, or ashes green. Release the power button.
2. The light has 5 modes - low, medium and high beam - daylight ash
mode and walk mode. Press and release the headlamp
power button to turn the light on. Cycle through the three brightness
levels by pressing and releasing the power button.
3. To access the daylight visible ash mode and walk mode, press and
hold the power button for greater than 3 seconds or until the
headlamp begins to ash.
4. With the headlamp in ash mode, press and release the power button to
access walk mode. From walk mode you can return to normal mode by
pressing and releasing the power button.
5. To turn the light off from either normal, ash, or walk mode, press and
hold the power button until the light turns off.
6. It is highly recommended that the light be put in lock mode during
transport of the headlamp in order to prevent accidentally turning on of
the headlamp. To put the headlamp in lock mode, press and hold the
power button for several seconds until the headlamp turns off and the
power button turns or ashes red.
LOW BATTERY INDICATOR
With approximately 15% battery capacity remaining, the indicator
light on the headlamp will turn from green to red.
RESERVE MODE
Reserve Mode will automatically shift your light to low beam when the
battery is very low and about to cut off. Once reserve mode starts you will
only be able to use Low Beam, Flash Mode and Walking Mode. High Beam
and Medium Beam will be disabled.
BATTERY CHARGING
1. Plug the AC Power Adapter into an electric outlet, then plug the USB
Cable from the AC Power Adapter into the rear of the head lamp. The
headlamp may also be charged from the USB outlet on a computer by
plugging the USB Cable directly from the computer to the headlamp.
2. The indicator light will be red until the Li-Ion battery is fully charged;
then it changes to green.
3. Unplug the AC Adapter from the headlamp and wall socket, grasping
the connectors rather than the cable.
4. Leaving the headlamp and AC Adapter connected indenitely will not
harm the batteries.
5. When storing for an extended period of time, charge the battery every
four weeks to maximize battery life.
MOUNTING THE HEADLAMP
Depending on the size of your bike’s handlebars, you may or
may not use the extra shim included with your MiNewt Cordless.
1. Remove the handlebar mount from the headlamp.
2. Open the mount and place on the handlebar.
3. Tightly squeeze the mount making sure it is securely mounted.
4. Once the handlebar mount is securely mounted, slide the
headlamp into place. There will be an audible “click” when the
headlamp is fully engaged with the handlebar mount.
5. Aim the headlamp by swiveling the headlamp back and forth.
Squeeze Here
Squeeze Here
Loading…
Rating
Let us know what you think about the NiteRider MiNewt 350 Cordless Bicycle Light by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.More about this manual
We understand that it’s nice to have a paper manual for your NiteRider MiNewt 350 Cordless Bicycle Light. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact NiteRider. They might be able to provide an original manual. Are you looking for the manual of your NiteRider MiNewt 350 Cordless Bicycle Light in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.
Specifications
| Brand | NiteRider |
| Model | MiNewt 350 Cordless |
| Category | Bicycle Lights |
| File type | |
| File size | 0.67 MB |
All manuals for NiteRider Bicycle Lights
More manuals of Bicycle Lights
Join the conversation about this product
Here you can share what you think about the NiteRider MiNewt 350 Cordless Bicycle Light. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.