Home > Camping & Outdoor > Flashlights > Nitecore Flashlights > Nitecore HM01 Flashlight

Manual Nitecore HM01 Flashlight

Need a manual for your Nitecore HM01 Flashlight? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

HM01

• 3D Pivoting System

• Specially Designed for ARC Rails

• Patented ATR Technology

Tactical Helmet Light

Features (English) HM01

(Francais) HM01

(Deutsch) HM01

Specications

Accessories

Battery Options

Technical Data

Warranty Service

Battery Installation

Installation on the Helmet

•

Utilizes a Luminus SST-20-W LED with a max output of 320 lumens

•

Max peak beam intensity of 1,390cd and max throw of 74 meters

•UtilizesaTIR(TotalInternalReection)Lensforasmooth

and soft beam

• Powered by a CR123A battery with a max runtime of 15 hours

•IncorporatedAdvancedTemperatureRegulation(ATR)module

(PatentNo.ZL201510534543.6)

•

Highlyecientconstantcurrentcircuitprovidesastableoutput

•3DPivotingSystemspeciallydesignedforARCRailstoexibly

adjust the beam angle

• Constructed from aero grade aluminum alloy

•HAIIImilitarygradehard-anodizednish

• Waterproof and dustproof rating in accordance with IP68

 (2meterssubmersible)

• Impact resistant to 1 meter

Dimensions: 53.8mm×39.7mm×20.8mm(Folded)

 (2.12"×1.56"×0.82")

Weight: 40.5g(1.43oz)

SpareO-ring,CR123ABattery,φ2.5mmHexKey,

φ1.5mmHexKey

Type Nominal Voltage Compatibility

Primary Lithium

Battery

CR123A 3V Y(Compatible)

Rechargeable

Li-ion Battery

RCR123A 3.6V/3.7V Y(Compatible)

FL1 STANDARD HIGH LOW

320 Lumens 35 Lumens

3h 15h

74m 24m

1,390cd 145cd

1m(ImpactResistance)

IP68,2m(WaterproofandSubmersible)

Note: The stated data is measured in accordance with the

internationalashlighttestingstandardsANSI/PLATOFL1-2019,

using1xCR123Alithiumbattery(1,600mAh)underlaboratory

conditions.Thedatamayvaryinrealworlduseduetodierent

battery usage or environmental conditions.

Limit

Screw

Power

Button

Operating Instructions

Battery Installation

Insert the battery as illustrated and screw to tighten the light

head.

Warnings:

1. Ensure the battery is inserted with the positive end towards

the head. The product will not work if the battery is

incorrectly inserted.

2. CAUTION! Possible dangerous radiation! Don't look into the

light! May be dangerous for your eyes.

3. When the product is kept in a backpack or left unused

for prolonged time, please remove the battery to prevent

accidental activation or battery leakage.

Installation on the Helmet

1. Slide the base onto the ARC Rail until the limit screw is

aligned with the desired attachment point.

2. Screw clockwise to tighten the limit screw with the hex key

(φ2.5mm)untilthebaseisfullyxed.

Beam Angle Adjustment

Loosen the screws on the 3D Pivoting System with the hex

key(φ1.5mm)andtightenthemafteradjustingthebeamtoa

desired angle. The 3D Pivoting System is available with 360°

rotation on both ends.

On / O

On:Whenthelightiso,longpressthePowerButtontoturnit

on and access the LOW Level.

O:Whenthelightison,longpressthePowerButtontoturnit

o.

Brightness Levels

When the light is on, short press the Power Button to switch

between HIGH and LOW.

ATR (Advanced Temperature Regulation)

The integrated ATR technology regulates the output of

the HM01 according to the working condition and ambient

environment to maintain the optimal performance.

Changing Batteries

The batteries should be replaced when the output appears to

be dim or the helmet light becomes unresponsive due to low

power.

Maintenance

Every 6 months, threads should be wiped with a clean cloth

followed by a thin coating of silicon-based lubricant.

Instructions

Installation des batteries

Insérez la batterie comme illustré et vissez pour serrer la tête

de lampe.

Avertissements:

1. Assurez-vous que la batterie est insérée avec l'extrémité

positive vers la tête. Le produit ne fonctionnera pas si la

batterie n'est pas insérée correctement.

2. ATTENTION! Rayonnement dangereux possible! Ne regardez

pas dans la lampe! Peut être dangereux pour vos yeux.

3. Lorsque le produit est conservé dans un sac à dos ou laissé

inutilisé pendant une période prolongée, veuillez retirer la

batterie pour éviter une activation accidentelle ou une fuite

de batterie

Installation sur le casque

1. Faites glisser la base sur le rail ARC jusqu'à ce que la vis de

ndecoursesoitalignéeaveclepointdexationsouhaité.

2. Vissez dans le sens des aiguilles d'une montre pour serrer la

visdendecourseaveclacléhexagonale(φ2,5mm)jusqu'à

cequelabasesoitcomplètementxée

Ajustement de l’angle du faisceau

Desserrez les vis du système de pivotement 3D à l'aide de la

cléhexagonale(φ1,5mm)etserrez-lesaprèsavoirajustéle

faisceau à l'angle souhaité. Le système de pivotement 3D est

disponible avec une rotation de 360 ° aux deux extrémités.

On / O

On: quand la lampe est éteinte, appuyez longuement sur

l’interrupteur pour l'allumer et accéder au niveau LOW.

O:Quandlalampeestallumée,appuyezlonguementsur

l’interrupteur pour l'éteindre.

Niveaux de luminosité

Lorsque la lampe est allumée, appuyez brièvement sur

l’interrupteur pour basculer entre HIGH et LOW.

Technologie ATR

Lesystèmeavancéderégulationdelatempérature(ATR)

permet à la lampe d’ajuster de façon dynamique son niveau

d’éclairage en fonction de sa température. Cela permet d’éviter

toutesurchauedelalampeetd’augmentersaduréedevie

Changement des Batteries

Les piles /batteries doivent être remplacées ou rechargées

lorsque la sortie semble faible ou que la lampe ne répond plus

en raison d'une faible puissance.

Maintenance

Touslessixmois,leletagedoitêtreessuyéavecunchion

propreetrecouvertd’unlubriantàbasedesilicone.

Bedienungsanleitung

Einlegen der Batterie/des Akkus

Legen sie die Batterie/den Akku ein – wie abgebildet – und

drehen Sie den Lampenkopf wieder fest.

Warnungen:

1. Stellen Sie sicher, dass der positive Pol zum Lampenkopf

zeigt.

Die HM01 funktioniert nicht, wenn der Akku/die Batterie

falsch eingelegt ist.

2. VORSICHT! Mögliche gefährliche Strahlung! NICHT in das

Licht blicken! Dies kann gefährlich für Ihre Augen sein.

3. Wenn das Produkt in einem Rucksack aufbewahrt oder

für längere Zeit nicht benutzt wird, entfernen Sie bitte die

Batterie/den Akku, um eine versehentliche Aktivierung oder

ein Auslaufen der Batterie/des Akkus zu verhindern.

Montage am Helm

1. Schieben Sie die Halterung auf die ARC-Schiene,

bis die Begrenzungsschraube auf den gewünschten

Befestigungspunkt ausgerichtet ist.

2. Ziehen Sie die Begrenzungsschraube mit dem Inbusschlüssel

(2,5mm)imUhrzeigersinnfest,bisdieHalterungvollständig

xiertist.

Einstellung des Strahlwinkels

Lösen Sie die Schrauben am 3D-Pivot-System mit dem

Sechskantschlüssel(1,5mm)undstellenSiedengewünschten

Abstrahlwinkel ein. Ziehen Sie die Schrauben wieder fest. Das

3D-Pivot-System ermöglicht eine 360°-Drehung an beiden

Enden.

Ein- / Ausschalten

Ein: Wenn das Licht ausgeschaltet ist, drücken Sie den Schalter

lange, um das Licht im LOW-Mode einzuschalten.

Aus: Wenn das Licht eingeschaltet ist, drücken Sie den Schalter

erneut lange, um das Licht auszuschalten.

Helligkeitsstufen

Wenn das Licht eingeschaltet ist, drücken Sie den Schalter kurz,

um zwischen HIGH- und LOW-Mode zu wechseln.

ATR (erweiterte Temperaturregulierung)

Mit dem "Advanced Temperature Regulation"-Modul regelt die

HM01 ihre Leistung und passt sich der Umgebungstemperatur

an, um so die optimale Leistung zu erhalten.

Batteriewechsel

Die Batterien sollten ausgetauscht oder die Akkus aufgeladen

werden, wenn der Lichtkegel dunkel erscheint oder die

Taschenlampe aufgrund geringer Batterieleistung nicht mehr

reagiert.

Wartung

Alle 6 Monate sollte das Gewinde mit einem sauberen Tuch

abgewischt und anschließend mit einer dünnen Schicht

Silikonfett geschmiert werden.

All NITECORE

products are warranted for quality. Any DOA /

defective product can be exchanged for a replacement through

a local distributor/dealer within 15 days of purchase. After

that, all defective / malfunctioning NITECORE

products can

be repaired free of charge within 60 months from the date

of purchase. Beyond 60 months, a limited warranty applies,

covering the cost of labor and maintenance, but not the cost of

accessories or replacement parts.

Thewarrantywillbenulliedif

1. theproduct(s)is/arebrokendown,reconstructedand/or

modiedbyunauthorizedparties.

2. theproduct(s)is/aredamagedduetoimproperuse.(e.g.

reversedpolarityinstallation)

3. theproduct(s)is/aredamagedduetobatteryleakage.

For the latest information on NITECORE

products and services,

please contact a local NITECORE

distributor or send an email

to [email protected]

※Allimages,textandstatementsspeciedhereinthis

user manual are for reference purpose only. Should any

discrepancy occur between this manual and information

speciedonwww.nitecore.com,SysmaxInnovationsCo.,

Ltd. reserves the rights to interpret and amend the content

of this document at any time without prior notice.

SYSMAX Innovations Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: info@nitecore.com

Web: www.nitecore.com

Address: Rm2601-06,CentralTower,No.5XiancunRoad,

 TianheDistrict,Guangzhou,510623,Guangdong,

 China

Please 󽗉nd us on facebook : NITECORE Flashlight

Thanks for purchasing NITECORE!

HM30040121

Made in China

Note: Pleaseremovetheinsulationlmbeforetherstuse.

Rating

Let us know what you think about the Nitecore HM01 Flashlight by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Nitecore HM01 Flashlight?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Nitecore HM01 Flashlight. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Nitecore HM01 Flashlight. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Nitecore. They might be able to provide an original manual. Are you looking for the manual of your Nitecore HM01 Flashlight in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Nitecore
Model	HM01
Category	Flashlights
File type	PDF
File size	0.68 MB

All manuals for Nitecore Flashlights
More manuals of Flashlights

Frequently Asked Questions about Nitecore HM01 Flashlight

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

A battery in my device is oxidized, can I still safely use it? Verified

Ja, the device can still be safely used. Firstly, remove the oxidizd battery. Never use bare hands to do this. Then clean the battery compartment with a cotton swab dipped in vinegar or lemon juice. Let it dry and insert new batteries.

This was helpful (102) Read more