Home > Household appliances > Kettles > Logik Kettles > Logik L17KBSS11 Kettle

Manual Logik L17KBSS11 Kettle

Need a manual for your Logik L17KBSS11 Kettle? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

GB-1 GB-2 GB-3

Power Connector Hole

UNPACKING

Remove all packaging from the unit. Retain the packaging. If you dispose of it

please do so according to local regulations.

The following items are included:

FIRST TIME USE

Clean your kettle by boiling a full kettle of water twice and then discarding the

water.

FILLING THE KETTLE

Slide the open switch to open the lid and ﬁll the

kettle with the required amount of water. Do not

exceed the maximum ﬁll level (Max 1.7L) as

indicated inside the kettle.

PRODUCT OVERVIEW

If the kettle is overﬁlled, boiling water

may be ejected from the spout and

cause scalding.

SWITCHING ON

Place the kettle on the stand. Connect the stand’s mains cable to the mains socket.

Press the power switch to the ON position (indicated by the symbol ‘I’).

The indicator on the side of the kettle will light up to indicate that the kettle is

heating.

• Never open the lid while the water

is boiling. The steam coming out

from the kettle is very hot.

• If there is insufﬁcient water in the

kettle, the automatic safety cut-o

will operate. If this happens, allow

the kettle to cool for ten minutes

before reﬁlling with cold water and

re-boiling.

slot

KEEPING THE MAINS CABLE TIDY

Extend the mains cable in the kettle stand to the

required length. Locate the mains cable in one

of the slots in the stand. For safety it is

recommended that the length of exposed

mains cable is kept as short as possible.

This kettle must only be used with the

stand provided.

CLEANING THE KETTLE

The kettle exterior should be cleaned with a soft damp cloth. Do not use abrasive

cleaners or scouring pads which may damage the ﬁnish of the kettle.

Never immerse the kettle or the stand in water and always keep the electrical

contacts dry. Always disconnect from the mains before cleaning the stand.

DESCALING THE KETTLE

Depending on the hardness of the water in

your area, limescale may be deposited on the

heating element and the inside of the kettle.

This normal build-up is not harmful to health

but an excessive amount of scale may aﬀect

the performance of the kettle.

To descale, ﬁll the kettle with distilled water

up to three-quarters of the Max level and

bring the water to boil. After the kettle has

switched oﬀ, add a descaling solution

following the manufacturers instructions.

Never attempt to descale the kettle by

chipping or scraping with a sharp implement.

Do not insert any foreign objects or allow any liquid to spill into the

Power Connector Hole.

90˚

CLEANING THE REMOVABLE SCALE FILTER

To prevent loose particles of limescale being

poured into your beverage, your kettle is

ﬁtted with a scale ﬁlter. You may remove the

ﬁlter and ﬁt it back in after cleaning.

To remove the ﬁlter, open the lid, lift up the

ﬁlter holder from the bracket at the spout.

Remove the ﬁlter from the ﬁlter holder.

To ﬁt in the ﬁlter, insert the ﬁlter into the

ﬁlter holder. Open the lid, place the ﬁlter

holder inside the bracket at the spout, and

push it down till it ﬁts in place.

Lid

Open Switch

Spout

Indicator

Kettle Stand

Handle

Power Switch

Mains Cable

• The Main Unit • Instruction Manual

(P.N.: L17KBSS11-001)

WHEN THE WATER HAS BOILED

The kettle will automatically switch oﬀ (indicated

by the symbol ‘0’ ).

• Ensure that the switch is not

obstructed and the lid is ﬁrmly

closed. The kettle will not turn o if

the switch is obstructed or if the lid

is open.

• After removing the kettle, there

may be some water on the surface

of the stand. This is condensation

from the steam that causes the

kettle to automatically switch o

after boiling. This is normal and

should not be a cause for alarm.

Stainless Steel Kettle

Instructi on Manual

L17KBSS11

Thank y ou for purchasing your new Log ik Kettle.

We recommend t hat you spe nd some tim e reading th is instruct ion

manual in o rder to full y understan d all the o perational features it

offers.

Read all th e safety in structions carefully be fore use and keep this

instruction manual for future refe rence.

Logik L17KBSS11_IB_110121.pdf 2 1/21/11 2:44 PM

Rating

Let us know what you think about the Logik L17KBSS11 Kettle by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Logik L17KBSS11 Kettle?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Logik L17KBSS11 Kettle. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Logik L17KBSS11 Kettle. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Logik. They might be able to provide an original manual. Are you looking for the manual of your Logik L17KBSS11 Kettle in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Logik
Model	L17KBSS11
Category	Kettles
File type	PDF
File size	1.87 MB

All manuals for Logik Kettles
More manuals of Kettles

Frequently Asked Questions about Logik L17KBSS11 Kettle

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the sieve for in my kettle? Verified

This is to catch any loose limescale that might have accumulated over time.

This was helpful (401) Read more

The kettle does not finish and keeps on boiling, what should I do? Verified

In many cases the lid of the kettle was not closed properly. If heat is allowed to escape, the kettle will keep on boiling. If this does not solve the problem you should contact the manufacturer or a mechanic.

This was helpful (265) Read more

Can I boil less than the minimim amount of water? Verified

No. When boiling less than the minimum amount of water, the temperature sensor might malfunction. This might prevent the kettle from switching off at boiling point, resulting in possibly dangerous situations.

This was helpful (116) Read more

Is it efficient to fill a kettle with hot water from the faucet? Verified

No. To get warm water to the faucet it is often needed to let cold water out first, which will be wasted. Also, the pipes will fill the same amount of hot water which will not be used and will cool, which leads to energy loss. Therefor it is better to fill a kettle with cold water.

This was helpful (75) Read more