Home > Kitchenware > Blenders > Hamilton Beach Blenders > Hamilton Beach 53602 Blender

Manual Hamilton Beach 53602 Blender

Need a manual for your Hamilton Beach 53602 Blender? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including

the following:

1. Read all instructions.

2. This appliance is not intended for use by persons with reduced physical,

sensory, or mental capabilities, or lack of experience and knowledge,

unless they are closely supervised and instructed concerning use of the

appliance by a person responsible for their safety.

3. This appliance shall not be used by children. Keep the appliance and its

cord out of reach of children.

4. Close supervision is necessary when any appliance is used near children.

Children should be supervised to ensure that they do not play with the

appliance.

5. To protect against risk of electrical shock, do not put cord, plug, base, or

motor in water or other liquid.

6. Turn the appliance OFF( ), then unplug from outlet when not in use, before

putting on or taking off parts, and before cleaning. To unplug, grasp the

plug and pull from the outlet. Never pull from the power cord.

7. Flashing light indicates ready to operate. Avoid any contact with blades or

moveable parts.

8. Do not operate any appliance with a damaged supply cord or plug, or

after the appliance malfunctions or has been dropped or damaged in any

manner. Supply cord replacement and repairs must be conducted by the

manufacturer, its service agent, or similarly qualified persons in order to

avoid a hazard. Call the provided customer service number for information

on examination, repair, or adjustment.

9. The use of attachments, including canning jars, not recommended or sold

by the appliance manufacturer may cause a risk of injury to persons.

10. Do not use outdoors.

11. Do not let cord hang over edge of table or counter or touch hot surfaces,

including stove.

12. Do not place on or near a hot gas or electric burner, or in a heated oven.

13. Keep hands and utensils out of the jar and away from the cutting blade,

while blending or chopping food, to reduce the risk of severe personal

injury and/or damage to the blender (attachments may not be provided

with blender). A rubber spatula may be used but only when blender is not

running.

14. Blades are sharp; handle carefully—especially when assembling,

disassembling, or cleaning inside blender jar.

15. Do not use a broken, chipped, or cracked blender jar.

16. To reduce the risk of injury, never place cutting blade assembly on base

without blending jar or personal jar attached.

17. Do not blend hot liquids in the personal jar.

18. Do not use broken, cracked, or loose cutting blade assembly.

19. Always operate blender with lid in place. Open vent area only for adding

ingredients.

20. Be careful if hot liquid is poured into blender as it can be ejected out of

appliance due to sudden steaming.

21. When blending hot liquids, open the center vent lid and close any edge

cover opening intended for pouring. To prevent possible burns: Do not

exceed the 3-cup (710-ml) level. Hot liquids may push off lid during

blending; therefore, with the protection of an oven mitt or thick towel,

place one hand on top of the lid, keep exposed skin away from the lid, and

start blending at lowest speed.

22. Ensure collar on base of blending jar and personal jar are tight and secure.

Injury can result if moving blades accidentally become exposed.

23. If the jar should twist or rotate when motor is switched ON, switch OFF

( ) immediately and tighten jar in collar or on blender base.

24. Do not leave blender unattended while it is operating.

25. Check that the appliance is OFF ( ) before plugging cord into wall outlet.

To disconnect, turn the control to OFF ( ); then remove plug from wall

outlet. To unplug, grasp the plug and pull from the outlet. Never pull from

the power cord.

Rating

Let us know what you think about the Hamilton Beach 53602 Blender by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Hamilton Beach 53602 Blender?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Hamilton Beach 53602 Blender. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Hamilton Beach 53602 Blender. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Hamilton Beach. They might be able to provide an original manual. Are you looking for the manual of your Hamilton Beach 53602 Blender in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Hamilton Beach
Model	53602
Category	Blenders
File type	PDF
File size	5.01 MB

All manuals for Hamilton Beach Blenders
More manuals of Blenders

Frequently Asked Questions about Hamilton Beach 53602 Blender

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.