Manual Drayton MiStat Thermostat

Manual

→

What is a programmable

room thermostat?

... an explanation for householders

A programmable room thermostat is both a

programmer and a room thermostat. A programmer

allows you to set ‘On’ and ‘Off’ time periods to suit

your own lifestyle. A room thermostat works by

sensing the air temperature, switching on the heating

when the air temperature falls below the thermostat

setting, and switching it off once this set temperature

has been reached.

So, a programmable room thermostat lets you choose

what times you want the heating to be on, and what

temperature it should reach while it is on. It will allow

you to select different temperatures in your home at

different times of the day (and days of the week) to

meet your particular needs.

Turning a programmable room thermostat to a higher

setting will not make the room heat up any faster. How

quickly the room heats up depends on the design of

the heating system, for example, the size of boiler and

radiators. Neither does the setting affect how quickly

the room cools down.

HOMEOWNER Guide

Drayton

MiStat

TM

Programmable

Room Thermostat

Model: P710R

Invensys

Customer Service Tel: 0845 130 5522

Customer Service Fax: 0845 130 0622

Technical Helpline: 0845 130 7722

Website: www.draytoncontrols.co.uk

E-mail: customer.care@invensys.com

l

@DraytonControls

x

/DraytonControls

EU Design Regs:- 002180638-1/2/3

User Guide 06490190001 Iss E

MiStat

MiStat

Step 2: Home Screen Step 5: Prog. Timetable

Step 3: Powersave

Step 6: Period Settings

→

→

→

HOMEOWNER Guide

Zone = Heating

Help text: Use left/right buttons to

select the days you want to change

Period 1 settings: describes the current timetable

settings, e.g. Heating is programmed to control

at 21.0°C from 7:00am until 10:00am

Period 3 settings: describes the current timetable

settings, e.g. Heating is programmed to control

at 21.0°C from 4:00pm until the following day

(>>> is indicating an event on next day)

Press select (

) when highlighted to adjust

settings (see step 6)

Up to 8 periods can be programmed

Arrow denotes that further options are

available if you scroll down (see step 7).

Timetable day range: Use left and right

keys to select available day blocks.

Options: Individual days (7day), Week

and weekend (5/2day), All week (24hr).

The available blocks depend on the

selection in menu “Change timetable type”

→

Day range & period

Stored programmes

MiStat P contains 3 pre-set programmes, as shown

below. These programs can be modified according to

personal needs and can be stored by using a name. Via

this name they can also be re-loaded.

Once a programme has been modified, the original

factory pre-set will no longer be available. On a System

Reset, only the current loaded programme will be

replaced with the factory setting – see Installation

Guide Step 5.

Help text: Use left/right buttons to change fields

Period settings: 21.0°C from 8:00am until

10:00am.

>>>

Indicates link to next event

Highlight shows adjustable field:

Use up/down buttons to adjust values

Step 1: Keys and Display / Zone Summary

MiStat

Home key: Press

to go back to the

home screen at

any time and to

toggle between

zone summary &

home screens

Current set temperature

& duration, e.g. heating

is programmed to be

21.0°C until 12:00 am

Arrow keys: Press to

move the highlight on

screen, and to change

field values

RF Pack: MiStat P710R

Select key: Press to select highlighted

options, and to open and save editor screens

This icon used

throughout these

instructions refers

to this button

Current Mode: Auto

Options: See table below.

Set: describes the current programme

event, e.g. Required temperature is 22.0°C

until 12:00am.

Link to Programme timetable - see Step 5.

Arrow denotes that further options are

available if you scroll down. These are:

Programme timetable, Settings

Timer: Off. See step 4.

Mode: Description:

Auto The room temperature will be

controlled according to the loaded

programme schedule (see step 6).

Manual The room temperature will be

controlled continuously according

to the set temperature. Use + - key

to change temperature.

Custom day

(Use: Illness

or holiday at

home)

The room temperature will be

controlled according to the Custom

day timetable. The programme is

the same each day.

Always Off The heating will be off.

Call for heat indication. This flame will be visible when

the room temperature is below the set temperature

Current set

temperature

Current room

temperature

This screen will show 2 Minutes after the last key

press, if “no display” is selected (see Installer

Settings), the screen will be blank.

Timer duration: Adjust between 1 and 23 hours

To cancel the timer

Timer Temperature: Adjust to suit requirements.

To set a suitable temperature for up to 23 hours,

e.g. for short term absence.

When the timer is running, the time will be counted

down each hour. Once the timer has elapsed, it will

return to the prior temperature screen.

Turning a programmable room thermostat to a lower

setting will result in the room being controlled at a

lower temperature, and saves energy. The way to

set and use your programmable room thermostat

is to find the lowest temperature settings that you

are comfortable with at the different times you have

chosen, and then leave it alone to do its job.

The best way to do this is to set low temperatures first,

say 18°C, and then turn them up by one degree each

day until you are comfortable with the temperatures.

You won’t have to adjust the thermostat further. Any

adjustments above these settings will waste energy

and cost you more money.

If your heating system is a boiler with radiators,

there will usually be only one programmable room

thermostat to control the whole house. But you can

have different temperatures in individual rooms

by installing thermostatic radiator valves (TRVs) on

individual radiators.

If you don’t have TRVs, you should choose a

temperature that is reasonable for the whole house.

If you do have TRVs, you can choose a slightly higher

setting to make sure that even the coldest room is

comfortable, then prevent any overheating in other

rooms by adjusting the TRVs.

The time on the programmer must be correct. Some

types have to be adjusted in spring and autumn at the

changes between Greenwich Mean Time and British

Summer Time.

You may be able to temporarily adjust the heating

programme, for example, ‘Override’, ‘Advance’ or

‘Boost’. These are explained in the manufacturer’s

instructions.

Back key: Press

to return to the

previous screen

Current room

temperature

Call for heat indication. This

flame will be visible when the

room temperature is below

the set temperature

+ & - keys:

Press to change

the current

temperature

until the next

programme

event

Select timer

function.

See Step 4.

Help text: To

prompt for

next action. It

relates to the

highlighted line.

Date

Current mode

= Auto Options:

see table in

step 2.

Now: Current room temperature

Link to Zone summary - see Step 1.

MiStat

Step 4: Timer

→

Programme 1

Programme 2

Programme 3

1st event 6:30am 20.0

o

C 6:30am 20.0

o

C 7:00am 20.0

o

C

2nd event 8:30am 16.0

o

C 8:30am 16.0

o

C 9:00am 18.0

o

C

3rd event 4:30pm 21.0

o

C 4:30pm 21.0

o

C 4:00pm 21.0

o

C

4th event

10:30pm

7.0

o

C

10:30pm

7.0

o

C

11:00pm

7.0

o

C

All week Week & Weekend or

Individual Days

Mon-Sun Mon-Fri Sat-Sun

Time Temp Time Temp Time Temp

1st event

6:30am 20.0

o

C 6:30am 20.0

o

C 7:00am 20.0

o

C

2nd event

8:30am 16.0

o

C 8:30am 16.0

o

C 9:00am 18.0

o

C

3rd event

12:00pm 21.0

o

C 12:00pm 21.0

o

C 12.00pm 21.0

o

C

4th event

2.00pm 16.0

o

C

2.00pm

16.0

o

C 2.00pm 18.0

o

C

5th event

4:30pm 21.0

o

C

4:30pm

21.0

o

C 4.00pm 21.0

o

C

6th event

10:30pm

7.0

o

C

10:30pm

7.0

o

C

11.00pm

7.0

o

C

All week Week & Weekend or

Individual Days

Mon-Sun Mon-Fri Sat-Sun

Time Temp Time Temp Time Temp

1st event

6:30am 21.0

o

C 6:30am 21.0

o

C 7:00am 20.0

o

C

2nd event

10:30pm 7.0

o

C 10:30pm 7.0

o

C 9:00am 18.0

o

C

3rd event

4:00pm 21.0

o

C

4th event

11:00pm 7.0

o

C

All week Week & Weekend or

Individual Days

Mon-Sun Mon-Fri Sat-Sun

Time Temp Time Temp Time Temp

: Short flashes = RF transmission

Continuous flashing = RF signal

issue

: Indicates a Service warning.

: Indicates that holiday

is enabled

: Low battery warning; see

Step 8.

Time

6444 Invensys MiStat Prog User 06490190001 IssE.indd 1 27/09/2013 09:32

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Drayton MiStat Thermostat. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Drayton. They might be able to provide an original manual. Are you looking for the manual of your Drayton MiStat Thermostat in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Drayton Thermostats
More manuals of Thermostats

Frequently Asked Questions about Drayton MiStat Thermostat

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.