Home > Garden & Terrace > Hedgecutters > Cramer Hedgecutters > Cramer 82TX10 Hedgecutter

Manual Cramer 82TX10 Hedgecutter

Need a manual for your Cramer 82TX10 Hedgecutter? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

cramer.eu

Product Overview

Your machine has been engineered and manufactured to high standard for

dependability, ease of operation, and operator safety. When properly cared for, it

will give you years of trouble-free performance.

Know your Pole Hedge Trimmer Head

1. Blade

2. Pivot Button

3. Scabard

4. Auxiliary handle

5. Rubber protector

6. Lower shaft

7. Release button

8. knob

Assembly

• This product requires assembly.

• Carefully remove the product and any accessories from the box. Make sure

that all items listed in the packing list are included.

• Inspect the product carefully to make sure no breakage or damage

occurred during shipping.

• Do not discard the packing material until you have carefully inspected and

satisfactorily operated the product.

Install the Pole Hedge Trimmer Head (See Figure 2)

1 Remove the rubber protector.

2 Loosen the knob on the coupler.

3 Push in the release button located on the lower shaft. Align the release

button with the positioning hole and slide the two shafts together. Rotate the

lower shaft until the button locks into the positioning hole.

4 Tighten the knob securely.

NOTE: If the button does not release completely in the positioning hole, the

shafts are not locked into place. Slightly rotate from side to side until the button is

locked into place.

Adjust the Trimmer Head Angle (See ﬁgure 3)

The trimmer head pivots 180° and can be locked into 13 positions within that range.

1 Hold the auxiliary handle.

2 Pull back and hold the pivot button.

3 Use the auxiliary handle to adjust the trimmer head angle.

4 Release the pivot button once the trimmer head is in the desired position.

5 The trimmer head should lock securely in place.

Operation

Tips for Optimum Use (See ﬁgure 4-5)

• Start by trimming the top of the hedge. Slightly tilt the tool (up to 15° relative

to the line of cut) so that the blade tips point slightly towards the hedge. This

will cause the blades to cut more effectively. Hold the tool at the desired

angle and move it steadily along the line of cut. The doublesided blade allows

you to cut in either direction.

• In order to obtain a very straight cut, stretch a piece of string along the length

of the hedge at the desired height. Use the string as a guideline, cutting just

above it.

• In order to obtain ﬂat sides, cut upwards with the growth. Younger stems

move outwards when the blade cuts downwards, causing shallow patches

in the hedge.

• Take care to avoid any foreign objects. Especially avoid hard objects such as

metal wire and railings, as these could damage the blades.

• Regularly oil the blades.

Maintenance

Clean the Machine

Clean the machine thoroughly to remove all dust and debris, after every work session.

• To reduce ﬁre hazards, keep the machine and, in particular, the motor free

of leaves, branches or excessive grease.

• Always clean the machine after use with a damp cloth dipped in neutral

detergent.

• Remove all traces of humidity using a soft damp cloth. Humidity can

generate risks of electric shocks.

Rating

Let us know what you think about the Cramer 82TX10 Hedgecutter by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Cramer 82TX10 Hedgecutter?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Cramer 82TX10 Hedgecutter. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Cramer 82TX10 Hedgecutter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Cramer. They might be able to provide an original manual. Are you looking for the manual of your Cramer 82TX10 Hedgecutter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Cramer
Model	82TX10
Category	Hedgecutters
File type	PDF
File size	1.46 MB

All manuals for Cramer Hedgecutters
More manuals of Hedgecutters

Frequently Asked Questions about Cramer 82TX10 Hedgecutter

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How do I know my hedgecutter is blunt? Verified

When branches are being pulled instead of cut, the hedgecutter is blunt and needs to be sharpened.

This was helpful (274) Read more

How do I sharpen my hedgecutter blades? Verified

Sharpening your hedgecutter blades is important for maintaining the performance and efficiency of the tool. To sharpen the blades, you will need a file or sharpening stone specifically designed for the type of blade on your hedgecutter.

This was helpful (158) Read more

How do I lubricate my hedgecutter blades? Verified

Lubricating your hedgecutter blades will help to reduce friction and wear, prolonging the life of the tool. Use a high-quality lubricating oil specifically designed for hedgecutters and apply a small amount to the blades after each use.

This was helpful (74) Read more

How can I prevent rust from forming on my hedgecutter blades? Verified

Rust can cause damage to your hedgecutter blades, reducing their performance and lifespan. To prevent rust, clean and dry the blades thoroughly after each use and store them in a dry, clean place. You can also consider applying a protective coating, such as oil or a rust inhibitor, to the blades before storing them.

This was helpful (43) Read more