Home > Camping & Outdoor > Tents > Coleman Tents > Coleman Sundome 12x10 Tent

Manual Coleman Sundome 12x10 Tent

Need a manual for your Coleman Sundome 12x10 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Connect Frame to Tent

–Insert one end of Main Tent Pole end

onto pin of pin & ring system at tent

corner on tent (illus. 4)

–Go to opposite end of pole and

gradually apply pressure to the pole

forming an arch until you are able to

insert the opposite pole end onto

pin & ring system

–Repeat for second pole (illus. 5)

SUNDOME

™

12’x10’ 2-ROOM

Layout & Positioning

of Tent, Pole

Assembly

–Layout and position tent with door

facing desired direction. (illus. 1)

–Unzip door

–Stake down tent using the rings of the

pin & ring system at the corners of the

tent. Keep the floor taut. (illus. 2)

–Assemble Frame Poles by

interlocking shock-corded poles.

This will make two long poles.

–Insert the poles diagonally into Pole

Sleeves.The center of the poles should

cross forming an “X” in the middle of

tent. (illus. 1)

–Fasten Frame Tie on top of tent over

both poles. (illus. 1), (illus. 3)

When You Are Ready To Set Up Your

Tent

–Select a level campsite clear of rocks,

branches and other hard or sharp

objects.

–Do not set up your tent under trees.

–For best results in windy conditions,

position the end of tent into the wind.

–See owners manual for more tips.

Rainfly

Poles

Rainfly Part No. 9260C131

Main Tent

Poles

POLE ASSEMBLY PARTS

Assembled

poles

inserted

through

pole

sleeves

Frame Tie

Instructions apply to Part Number 9260D121

illus. 1

illus. 2 Tent stake

through ring

illus.4

Insert pole end onto

pin & ring

illus. 5 Tent

frame set-up

illus. 3

Frame Tie

Part No. 9260-128

Part No. 9260-130

Part No. 9260-129

Rating

Let us know what you think about the Coleman Sundome 12x10 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Coleman Sundome 12x10 Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Coleman Sundome 12x10 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Coleman Sundome 12x10 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Coleman. They might be able to provide an original manual. Are you looking for the manual of your Coleman Sundome 12x10 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Coleman
Model	Sundome 12x10
Category	Tents
File type	PDF
File size	0.06 MB

All manuals for Coleman Tents
More manuals of Tents

Frequently Asked Questions about Coleman Sundome 12x10 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more