Home > Bicycles & Mopeds > Cycling Computers > Bontrager Cycling Computers > Bontrager Duotrap S Cycling Computer

Manual Bontrager Duotrap S Cycling Computer

Name: Bontrager Duotrap S Cycling Computer
Brand: Bontrager
SKU: Duotrap S
Rating: 33 (6 reviews)

Need a manual for your Bontrager Duotrap S Cycling Computer? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 4 comments and has 6 votes with an average product rating of 33/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

•

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

-- Consult the dealer or experienced radio / TV technician for help.

NOTES:

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE

CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. ANY CHANGES

OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE GRANTEE OF THIS DEVICE

COULD VOID THE USER’S AUTHORITY TO OPERATE THE DEVICE.

Pairing: Consult your ANT + or Bluetooth Smart device’s instructions for pairing. Sensor

will need to be activated directly before pairing process.

Sensor Activation: To verify proper magnet install, spin wheel or turn crank more than

two revolutions. Initial sensor activation and magnet alignment will be indicated by the

LEDs ﬂashing up to 10 times.

Please Note: The sensor will stay active for at least 2 minutes although the LEDs no

longer ﬂash.

Bluetooth Smart Connection: Install and activate sensor. Turn on your phone’s

(or other compatible device) Bluetooth capability. Open the desired cycling app and follow

instructions for Bluetooth Smart sensor connection. Please note, Bluetooth Smart devices

do not always appear in your phone’s settings, even when connected. All apps collect,

share, and display speed and cadence information differently.

FCC ID: 04GDUOTRAPS

This device complies with part 15 of the FCC Rules.

Operation is subject to the following conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

This device complies with Industry Canada RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause interference, and (2) this device

must accept any interference, including interference that may cause undesired operation

of the device.

Leprésent appareil est conforme aux CNR d’Industrie Canada applicable aux appareils

radio. Exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1)

l’appareil ne doit pas produire de brouillage, et (2) l’utilsateur de l’appareil doit accepter

tout brouillage radioélectrque subi, meme si le brouillage est susceptible d’en

compromettre le fonctionnement.

www.bontrager.com

IC: 7666A-DUOTRAPS

Remove the pedal and

install cadence magnet on

nondrive side crank arm

with thick side nearer the

chainstay. Use cadence

magnet band that gives

the best ﬁt.

For carbon bikes, place

magnet 135mm or

145mm from the center

of the bottom bracket to

the center of the magnet.

Hint: If the magnet is aligned

but the LED does not

illuminate, place a cadence

band shim underneath the

appropriate magnet.

Verify magnet is aligned with

sensor by illumination of

green cadence sensor LED

as crank is turned. LED will

illuminate for the ﬁrst 10

revolutions. Align magnet

with tech mark on alloy

bike’s chain stay.

145mm

135mm

SPEED MAGNET INSTALLATION (CARBON AND ALLOY BIKES)

CADENCE MAGNET INSTALLATION (CARBON AND ALLOY BIKES)

PAIRING AND SENSOR ACTIVATION

Speed magnet (carbon

bikes) Snap magnet onto

inside/trailing edge non-drive

side spoke. Some carbon

frame/wheel combinations

may require magnet to be

ﬂipped so the thin side faces

sensor.

Speed magnet (alloy bikes)

Tighten wheel magnet on

spoke for alloy bikes

Align speed magnet with

tech mark on DuoTrap S.

Verify sensor is aligned with

magnet by illumination of red

speed sensor LED as wheel

is rotated. LED will illuminate

for the ﬁrst 10 revolutions.

Rating

Let us know what you think about the Bontrager Duotrap S Cycling Computer by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Bontrager Duotrap S Cycling Computer?
Yes No

33%

67%

6 votes

Join the conversation about this product

Here you can share what you think about the Bontrager Duotrap S Cycling Computer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Marc 28-12-2020
My duotrap sensor is attached to the frame with the screw but keeps coming out of the frame on the other side. The duo staircase is actually never completely fixed in the frame. How to solve please?

reply | This was helpful (2) (Translated by Google)

claes willy 21-11-2020
can't connect my duotrap comes on my mobile but does not connect what am I doing wrong grtjs willy

reply | This was helpful (0) Read more (Translated by Google)

De Wolf Johan 27-11-2020
Hi Willy, just got the same thing going on, first worked great, now I only see rpm no wattage or speed anymore, weird issue already tried all apps all the same problem.

This was helpful (8) (Translated by Google)

Jacob meijer 13-08-2023
Duotrap s does not give a green and red signal at wheel revolution, is the battery empty?

reply | This was helpful (0) (Translated by Google)

More about this manual

We understand that it’s nice to have a paper manual for your Bontrager Duotrap S Cycling Computer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Bontrager. They might be able to provide an original manual. Are you looking for the manual of your Bontrager Duotrap S Cycling Computer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Bontrager
Model	Duotrap S
Category	Cycling Computers
File type	PDF
File size	0.43 MB

All manuals for Bontrager Cycling Computers
More manuals of Cycling Computers

Frequently Asked Questions about Bontrager Duotrap S Cycling Computer

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Why do I need to enter the size of my wheel? Verified

To calculate the traveled distance, the cycling computer uses the number of revolutions. The number of revolutions multiplied by the size of the wheel equals the traveled distance.

This was helpful (4123) Read more

How many miles is one kilometer? Verified

One kilometer equals 0,621 mile. Ten kilometers makes 6,21 miles. One mile equals 1,609 kilometer. Ten miles makes 16,09 kilometers.

This was helpful (704) Read more

A battery in my device is oxidized, can I still safely use it? Verified

Ja, the device can still be safely used. Firstly, remove the oxidizd battery. Never use bare hands to do this. Then clean the battery compartment with a cotton swab dipped in vinegar or lemon juice. Let it dry and insert new batteries.

This was helpful (703) Read more