Home > Business equipment > Safes > Barska Safes > Barska AX11970 Safe

Manual Barska AX11970 Safe

Need a manual for your Barska AX11970 Safe? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

PARTS OF THE SAFE

Parts of the Safe

A. Key Entry

B. Indicator Light

C. Fingerprint Scanner

D. Wake Up Button

E. Initialization Button

F. Battery Compartment

and Cover

G. Cable Slot

H. Mounting Holes

(located under the safe)

See reverse side for more information

8/12

BC239

OPENING THE SAFE WITH ACCESS KEY

1. Insert access key into key entry, turn clockwise to open,

partially lift lid of safe and remove access key by turning it

counter clockwise

2. Open safe by lifting the lid of the safe

NOTE

Store access keys in a secure place. NOT inside of safe

When calling for replacement or additional access keys have

the access key code number ready. The access key code is

etched in the key entry and on the access keys.

BATTERIES

1. Locate the battery compartment and remove battery cover

2. Gently slide battery holder out of the compartment

3. Place 4, AA batteries and pay attention to the polarity of

each battery

4. Gently slide battery holder back into place

5. Replace battery cover

REPLACING BATTERIES

The red indicator light will start flashing and a continuous

beeping sound will be heard. This indicates that the batteries

are low.

1. Open safe by using the access key; turn clockwise

2. Repeat steps 1-5 of “Batteries” and replace old batteries with

new batteries

3. Close safe and ensure that the safe is locked

NOTE

After replacing the batteries safe retains registered fingerprints

REGISTERING A FINGERPRINT

The safe is in demo mode, ANY fingerprint can open the safe

1. With the safe open press and release the initialization button

2. A beep will be heard and scanner will flash red

3. Immediately place desired finger on the scanner

- Hold finger still, until registration process is complete

4. Registration process is complete when a total three beeps

are heard. See below

Successful Save

- Indicator light will flash green, followed by one beep,

indicator light will flash green twice and two

consecutive beeps

- Registration has been successful

Unsuccessful Save

- Indicator light will flash green, followed by one beep,

indicator light will flash red and two consecutive beeps

- Repeat registration process again

NOTE

- To add more fingerprints/users repeat steps above

- Stores up to 120 fingerprints

- For security purposes wipe fingerprint off scanner

For Accurate and Consistent Fingerprint Scanning

- Use scanner in low light conditions

- Use the index finger

- Place and hold finger firmly on the scanner

- Each user should register 2-3 different fingerprints

TESTING A REGISTERING A FINGERPRINT

1. With safe lid open, press the wake up button

2. Place registered finger on the scanner

Successfully Saved Fingerprint

- Indicator light will flash green indicating a valid fingerprint

- You will hear the safe unlock

Unsuccessful Fingerprint

- Indicator light will flash red and green consecutively

indicating that the fingerprint in not valid

- Repeat steps in “Registering A Fingerprint”

4. Close safe and ensure that the safe is locked

5. For security purposes wipe fingerprint off scanner

OPENING THE SAFE USING A FINGERPRINT

1. Press the wake up button

2. Place registered finger on the scanner

3. The indicator light will flash green indicating a valid fingerprint

4. Gently lift the door of the safe

5. Close safe and ensure that the safe is locked

6. For security purposes wipe fingerprint off scanner

DELETING ALL FINGERPRINTS

1. With the safe open locate the battery compartment and

remove battery cover

2. Gently slide battery holder of out of the compartment

3. Remove all 4, AA batteries from battery holder

4. Press wake up button a few times to release remaining

electronic power

5. Re-insert 3, AA batteries and pay attention to the polarity of

each battery

6. Press and hold down the initialization button

7. Re-insert the last AA battery you will hear 2 beeps, release

initialization button

8. Gently slide battery holder back into place and replace

battery cover

WARNING

Avoid leaving safe door open and unattended; it will allow

unauthorized individuals to add their fingerprint and/or

reprogram the safe, gaining full access to the safe and the

contents.

User Manual For Portable

Biometric Compact Safe

Rating

Let us know what you think about the Barska AX11970 Safe by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Barska AX11970 Safe?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Barska AX11970 Safe. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Barska AX11970 Safe. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Barska. They might be able to provide an original manual. Are you looking for the manual of your Barska AX11970 Safe in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Barska
Model	AX11970
Category	Safes
File type	PDF
File size	0.15 MB

All manuals for Barska Safes
More manuals of Safes

Frequently Asked Questions about Barska AX11970 Safe

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

The lock on my electronic safe won't open, but I am sure the code I enter is correct. What can I do? Verified

This can happen when the batteru voltage is too low. This can be caused by cheap or nearly empty batteries. Replace the batteries and try again. If this does not solve the problem you should contact the manufacturer.

This was helpful (1311) Read more

I lost the combination of my safe, what can I do? Verified

In the case of a safe with an electronic lock, there is often an included emergency key with which the safe can still be opened. If no emergency key or other solution is available, there are specialized companies that can help. However, in the case of a small safe, the cost of a specialist may be higher than that of a new safe. In that case, the last option is to break open the safe.

This was helpful (610) Read more

When is it a good idea to secure my safe? Verified

In general it's a good idea to secure safes of 1000 kilogram or less. This prevents a thief to steal the entire safe. It's also possible that an insurance company demands a safe to be secured. Always have your safe secured by a specialist.

This was helpful (178) Read more