Home > Car miscellaneous > Breathalyzers > BACTRACK Breathalyzers > BACTRACK SingleShot Breathalyzer

Manual BACTRACK SingleShot Breathalyzer

Need a manual for your BACTRACK SingleShot Breathalyzer? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Breath Alcohol Test

INSTRUCTIONS

• Read These Instructions Completely

• Do Not Use If Expired

• Make Sure Crystals Are Yellow Before Using The Test

Before You Test

This Is Not a Self Test.You Should Never Test Yourself.

Alcohol impairs judgement. Have someone who has not

been drinking help you conduct the test and read the results.

Please see other side of this pamphlet for important information.

™

If the test subject cannot wait, have

subject rinse his/her mouth with water

before taking the test. This removes

alcohol vapors in the mouth that could

cause a false positive result.

Wait 15 Minutes After Last

Alcoholic Drink.

STEP 1

Subject should hold Detector vertically so

arrows on “BLOW” end are pointing down.

Subject should then BLOW/EXHALE very

hard into tube, in one continuous breath, for

12 seconds. Shake the Detector side-to-side

to distribute the crystals evenly in Detector

window. Lay Detector on flat surface and

WAIT 2 MINUTES.

Hold Vertically So Arrows

Are Pointing Down and

Blow for 12 Seconds.

STEP 3

BLOW

Read The Results

• The color change may be difficult to see under certain

lighting. For best results, read under lighting such as

incandescent, fluorescent, or indirect sunlight. A flashlight

with an incandescent bulb can be used to help read the

result. Hold the flashlight to the side so that the light does

not fall directly on the Detector.

• Compare results to an unused Detector or to the Yellow

box. If most of the crystals are not GREEN or BLUE (under

the suggested lighting), then the result is negative.

• Detector results may not be reliable if testing is not

conducted according to these instructions.

Positive Results: Most of crystals are

a light AQUA (GREEN/BLUE, BLUE/GREEN)

cast. This shows that the breath alcohol is

at or above the level printed on the Detector.

Negative Results: Most of the

crystals, are light YELLOW. This shows

that the breath alcohol is below the level

printed on the Detector.

The YELLOW does not have to match the

unused Detector. It may be much lighter or

paler YELLOW than an unused Detector.

Step 4

STEP 4

Squeeze the middle of the Detector

between thumb and forefinger to break

inner glass tube.

Use the Detector immediately.

Squeeze Only Once, Do Not

Crush or Bend Tube.

STEP 2

Rating

Let us know what you think about the BACTRACK SingleShot Breathalyzer by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the BACTRACK SingleShot Breathalyzer?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the BACTRACK SingleShot Breathalyzer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your BACTRACK SingleShot Breathalyzer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact BACTRACK. They might be able to provide an original manual. Are you looking for the manual of your BACTRACK SingleShot Breathalyzer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.